Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)
Tags: zigbee chi, zigbee controller, zigbee coordinator, zigbee camera, zigbee cluster library, zigbee chipset, zigbee channel frequencies, zigbee communication, zigbee ceiling fan, zigbee devices, zigbee data rate, zigbee development kit, zigbee dongle, zigbee distance, zigbee dimmer, zigbee door lock, zigbee deadbolt, zigbee diy, zigbee dublin, zigbee bandwidth, zigbee bluetooth, zigbee building automation, zigbee blog, zigbee ballast, zigbee bacnet, zigbee books, zigbee board, zigbee blinds, zigbee basics, zigbee certification,
Ask More Info Of  A Seminar Ask More Info Of A Project Post Reply  Follow us on Twitter
14-06-2009, 01:28 AM
Post: #1
Seminar Report On ZigBee: Next Generation Wireless Network
Seminar Report
On
ZigBee: Next Generation Wireless Network
Submitted by
Anil Kumar K
In the partial fulfillment of requirements in degree of
Master of Technology (M-Tech)
in
SOFTWARE ENGINEERING
DEPARTMENT OF COMPUTER SCIENCE
COCHIN UNIVERSITY OF SCIENCE AND TECHNOLOGY
KOCHI-682022
2005Page 2

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
2
ABSTRACT
ZigBee is an open technology developed by the SigBee Alliance to overcome the limitations of
BLUETOOTH and Wi-Fi. ZigBee is an IEEE 802.15.4 standard for data communications with
business and consumer devices. It is designed around low-power consumption allowing batteries to
essentially last forever. BLUETOOTH as we know was developed to replace wires and Wi-Fi to
achieve higher data transfer rate, as such till now nothing has been developed for sensor networking
and control machines which require longer battery life and continuous working without human
intervention. ZigBee devices allow batteries to last up to years using primary cells (low cost)
without any chargers (low cost and easy installation).
The ZigBee standard provides network, security, and application support services operating on top
of the IEEE 802.15.4 Medium Access Control (MAC) and Physical Layer (PHY) wireless standard.
It employs a suite of technologies to enable scalable, self-organizing, self-healing networks that can
manage various data traffic patterns. The network layer supports various topologies such star,
clustered tree topology and self healing mesh topology which is essential in Smartdust
Apart from easy installation and easy implementation ZigBee has a wide application area such as
home networking, industrial networking, Smartdust, many more, having different profiles specified
for each field. The upcoming of ZigBee will revolutionize the home networking and rest of the
wireless world. Page 3

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
3
Table of Contents
1. Intorduction
3
2. Existing Standards
4
2.1. Wi-Fi (IEEE standard 802.11)
4
2.1.1. Standards
5
2.1.2. Network Types
5
2.2. Bluetooth (IEEE standard 802.15.1)
6
2.3. ZigBee (IEEE standard 802.15.4)
7
3. Intoduction to ZigBee
8
3.1. The ZigBee Alliance
8
3.2. The Name ZigBee
9
3.3. Why ZigBee
9
3.4. IEEE 802.15.4
11
3.5. Components of IEEE 802.15.4
11
4. ZigBee/IEEE 802.15.4 “ General Characteristics
12
4.1. ZigBee/IEEE 802.15.4 “ Typical Traffic Types Addressed
12
5. ZigBee Protocol Stack
14
5.1. The Physical Layer (PHY)
15
5.2. Media Access Layer (MAC)
16
5.2.1. Frame Structure
18
5.2.2. Super Frame Structure
20
5.3. Network and Security Layer
21
5.4. Application Layer
23
5.4.1. ZigBee Device Object
24
5.4.2. Application Support Layer
24
6. ZigBee Security
24
7. ZigBee Applications
25
8. Conclusion
28
9. Bibliography
29 Page 4

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
4
1.Introduction
It was in 1896 that Guglielmo Marconi invented the first wireless telegraph. In 1901 he sent
telegraphic signals across the Atlantic ocean from Cornwall to St. Johnâ„¢s Newfoundland; a distance
of 1800 miles. Over the last century, advances in wireless technologies have led to the radio, the
television, the mobile telephone, and communication satellites. All type of information can now be
send to any corner of the world.
A wireless network is a flexible data communication system, which uses wireless media such as
radio frequency technology to transmit and receive data over the air, minimizing the need for wired
connections. Wireless networks are used to augment rather than replace wired networks and are
most commonly used to provide last few stages of connectivity between a mobile user and a wired
network.
Wireless networks use electromagnetic waves to communicate information from one point to
another without relying on any physical connection. Radio waves are often referred to as radio
carriers because they simply perform the function of delivering energy to a remote receiver. The
data being transmitted is superimposed on the radio carrier so that it can be accurately extracted at
the receiving end. Once data is superimposed (modulated) onto the radio carrier, the radio signal
occupies more than a single frequency, since the frequency or bit rate of the modulating information
adds to the carrier. Multiple radio carriers can exist in the same space at the same time without
interfering with each other if the radio waves are transmitted on different radio frequencies. To
extract data, a radio receiver tunes in one radio frequency while rejecting all other frequencies. The
modulated signal thus received is then demodulated and the data is extracted from the signal.
Wireless networks offer the following productivity, convenience, and cost advantages over
traditional wired networks:
Mobility: provide mobile users with access to real-time information so that they can roam
around in the network without getting disconnected from the network. This mobility
supports productivity and service opportunities not possible with wired networks. Page 5

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
5
Installation speed and simplicity: installing a wireless system can be fast and easy and can
eliminate the need to pull cable through walls and ceilings.
Reach of network: the network can be extended to places which can not be wired
More Flexibility: wireless networks offer more flexibility and adapt easily to changes in the
configuration of the network.
Reduced cost of ownership: while the initial investment required for wireless network
hardware can be higher than the cost of wired network hardware, overall installation
expenses and life-cycle costs can be significantly lower in dynamic environments.
Scalability: wireless systems can be configured in a variety of topologies to meet the needs
of specific applications and installations. Configurations can be easily changed and range
from peer-to-peer networks suitable for a small number of users to large infrastructure
networks that enable roaming over a broad area.
2. Existing Standards
In the world of wireless communication there are many standards existing today, each with a
specific application field and characteristics which best suites the need. However among so many
standard we will only discuss about Wi-Fi, Bluetooth and ZigBee as they are the most
complementary standards among all.
2.1.Wi-Fi (IEEE standard 802.11)
Wi-Fi is the wireless way to handle networking. It is also known as 802.11 networking and wireless
networking. The big advantage of Wi-Fi is its simplicity. Mobile connectivity for computers is a
rapidly growing requirement. Of the schemes that are available the IEEE 802.11 standard, often
termed Wi-Fi has become the de-facto standard. With peak operating speeds of around 54 Mbps it is
able to compete with many wired systems. As a result of the flexibility and performance of the
system, many Wi-Fi hotpots have been set up and more are following. These enabvle people to
use their laptop computers as they wait in hotels, airport lounges, cafes, and many other places using
a wire less link rather that needing to use a cable. Page 6

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
6
2.1.1. Standards
There is a plethora of standards under the IEEE 802 LMSC (LAN / MAN Standard Committee). Of
these even 802.11 has variety of standards, each with a letter suffix. These cover everything from
the wireless standards themselves, to standards for security aspects, quality of service and the like:
802.11a “ Wireless network bearer operating in the 5 GHz. ISM band with data rate up to 54 Mbps.
802.11b “ Wireless network bearer operating in the 2.4 GHz ISM band with data rates up to 11
Mbps
802.11e “ Quality of service and prioritization
802.11f “ Handover
802.11g “ Wireless network bearer operating in 24.GHz ISM band with data rates up to 54 Mbps
802.11h “ Power control
802.11i “ Authentication and encryption
802.11j “ Internetworking
802.11k “ Measurement reporting
802.11n “ stream multiplexing
802.11s “ Mesh networking
Of these the standards that are most widely known are the network bearer standards, 802.11a,
802.11b, 802.11g.
2.1.2 Network types
There are two types of network that can be formed: infrastructure networks; and ad-hoc networks.
The infrastructure application is aimed at office areas or to provide a hotspot. It can be installed
instead of a wired system, and can provide considerable cost savings, especially when used in
established offices. A backbone wired network is still required and is connected to a server. ThePage 7

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
7
wireless network is then split up into a number of cells, each serviced by a base station or Access
Point (AP) which acts as a controller for the cell. Each Access Point may have a range of between
30 and 300 metres dependent upon the environment and the location of the Access Point.
The other type of network that may be used is termed as Ad-Hoc network. These are formed when a
number of computers and peripherals are brought together. They may be needed when several
people come together and need to share data or if they need to access a printer without the need for
having to use wire connections.
In this situation the user4s may only communicate with each other and not a larger wired network.
As a result there is no Access Point and special algorithms within the protocols are used to enable
one of the peripherals to take over the role of master to control the network with the others acting as
slaves.
2.2. Bluetooth
Bluetooth is based on IEEE standards 802.15.1. Bluetooth has now established itself in the market
place enabling a variety of devices to be connected together using wireless technology. Bluetooth
technology has come into its own connecting remote headsets to mobile phones, but it is also used in
a huge number of other applications as well.
Bluetooth technology originated in 1994 when Erricsson came up with a concept to use a wireless
connection to connect items such as an earphone and a cordless headset and the mobile phone.
The name of the Bluetooth standard originates from the Danish king Harald Blatand who was king
of Denmark between 940 and 981 AD. His name translates as Bluetooth and this was used as his
nickname. A brave warrior, his main achievement was that of uniting Denmark under the banner of
Christianity, and then uniting it with Norway that he had conquered. The Bluetooth standard was
named after him because Bluetooth endeavors to unite personal computing and telecommunications
devices. Page 8

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
8
Bluetooth is a wireless data system and can carry data at speeds up to 721 Kbps in its basic form and
in addition to this it offers up to three voice channels. Bluetooth technology enables a user to
replace cables between devices such as printers, fax machines, desktop computers and peripherals,
and a host of other digital devices. Furthermore, it can provide a connection between an ad-hoc
wireless network and existing wired data networks.
The technology is intended to be placed in a low cost module that can be easily incorporated into
electronics devices of all sorts. Bluetooth uses the license free Industrial, Scientific and
Medical(ISM) frequency band for its radio signals and enables communications to be established
between devices up to a maximum distance of 100 metres. Running in the 2.4 GHz ISM band,
Bluetooth employs frequency hopping techniques with the carrier modulated using Gaussian
Frequency Shift Keying (GFSK).
After a network connection is established between two devices they change their frequency 1600
times per second thus leaving no time for interference, and if by chance there is interference it will
be for few microseconds. No other sub network will be working at the frequency at which other sub
networks work, thus eliminating interference.
2.3. ZigBee
ZigBee is a wireless networking standard that is aimed at remote control and sensor applications
which is suitable for operation in harsh radio environments and in isolated locations, It builds on
IEEE standard 802.15.4 which defines the physical and MAC layers. Above this ZigBee defines the
application and security layer specifications enabling interoperability between products from
different manufacturers. In this way ZigBee is a superset of the 802.15.4 specification.
With the applications for remote wireless sensing and control growing rapidly it is estimated that the
market size could reach hundreds of millions of dollars as early as 2007. This makes ZigBee a very
attractive proposition, and one, which warrants the introduction of a focused standard. Page 9

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
9
3. Introduction to ZigBee
The past few years have witnessed a rapid growth of wireless networking. However, up to now
wireless networking has been mainly focused on high “ speed communications, and relatively long
range applications such as IEEE 802.11 wireless local area network standards. The first well known
standard focusing on low rate wireless personal area networks was BLUETOOTH. However it has
limited capacity for networking of many nodes. There are many wireless monitoring and control
applications in industrial and home environments which require longer battery life, lower data rates
and less complexity than those from existing standards. For such wireless applications, a new
standard called IEEE 802.15.4 has been developed by IEEE. The new standard is also called
ZigBee.
3.1 The Zigbee Alliance
The ZigBee standard is organized under the auspices of the ZigBee Alliance. The ZigBee alliance is
an organization of companies working together to define an open global standard for making low
power wireless networks. The intended outcome of ZigBee alliance is to create a specification
defining how to build different network topologies with data security features and interoperable
application profiles. This organization has over 150 members, of which seven have taken on the
status of what they term promoter. These seven companies are Ember, Honeywell, Invensys,
Mitsubishi, Motorola, Philips and Samsung. A big challenge for the alliance is to make the
interoperability to work among different products. To solve this problem, the ZigBee Alliance has
defines profiles, depending on what type of category the product belongs to. For example there is a
profile called home lightning that exactly defines how different brands of home lightning-products
should communicate with each other. Under the umbrella of the ZigBee Alliance, the new standard
will be pushed forward, taking on board the requirements of the users, manufacturers and the system
developers.
The Alliance has specified three profiles:Page 10

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
10
Private Profile: In this profile interoperability is not at all important. However producers
cannot use the official ZigBee stamp, but can claim that Ëœbased on ZigBee platformâ„¢.
Published Profile: A private profile is shared among other users. Still one cannot use official
ZigBee stamp, but can claim Ëœbased on ZigBee platformâ„¢.
Public profile: It is the official ZigBee profile.
3.2. The Name ZigBee
The name ZigBee is said to come from the domestic honeybee which uses a zig-zag type of dance to
communicate important information to other hive members. This communication dance (The
ZigBee Principle) is what engineers are trying to emulate with this protocol “ a bunch of separate
and simple organisms that join together to tackle complex tasks.
3.3 Why ZigBee?
There are a multitude of standards like Bluetooth and Wi-Fi that address mid to heigh data rates for
voice, PC LANs, video etc. However, up till now there hasnâ„¢t been a wireless network standard that
meets the unique needs of sensors and control devices. Sensors and controls donâ„¢t need high
bandwidth but they do need low latency and very low energy consumption for long battery lives and
for large device arrays.
There are a multitude of proprietary wireless systems manufactured today to solve a multitude of
problems that donâ„¢t require high data rates but do require low cost and very low current drain. These
proprietary systems were designed because there were no standards that met their application
requirements. These legacy systems are creating significant interoperability problems with each
other and with newer technologies.
The ZigBee Alliance is not pushing a technology; rather it is providing a standardized base set of
solutions for sensor and control systems. Here are the following points that justify the use of ZigBee
over the existing standards. Page 11

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
11
Low power consumption, simply implemented: Users expect batteries to last many months to
years! Consider that a typical single-family house has about 6 smoke/CO detectors. If the
batteries for each one only lasted six months, the home owner would be replacing
batteries every month!
In contrast Bluetooth, which has many different modes and states depending upon your
latency and power requirements, ZigBee/IEEE 802.15.4 has two major states:
active(transmit/receive) or sleep. The application software needs to foicus on the
application, not on which power mode is optimum for each aspect of operation.
Even mains powered equipment needs to be conscious of energy. ZigBee devices will be
more ecological than their predecessors saving megawatts at it full deployment. Consider
a future home that has 100 wireless control/sensor devices,
Case 1: 802.11 Rx power is 667 mW (always on) @ 100 devices/home & 50,000
homes/city = 150 3.33 megawatts.
Case 2: 802.15.4 Rx power is 30 mW (always on) @ 100 devices/home & 50,000
homes/city = 150 kilowatts.
Case 3: 802.15.4 power cycled at .1% (typical duty cycle) = 150 watts
Low cost to the users means low device cost, low installation cost and low maintenance.
ZigBee devices allow batteries to last up to years using primary cells (low cost)
without any chargers (low cost and easy installation). ZigBeeâ„¢s simplicity allows
for inherent configuration and redundancy of network devices provides low
maintenance.
High density of nodes per network: ZigBeeâ„¢s use of the IEEE 802.15.4 PHY and MAC
allows networks to handle any number of devices. This attribute is critical for massive
sensor arrays and control networks.
Simple protocol, global implementation: ZigBeeâ„¢s protocol code stack is estimated to be
about 1/4
th
of Bluetoothâ„¢s or 802.11â„¢s. Simplicity is essential to cost, interoperability, and
maintenance. The IEEE 802.15.4 PHY adopted by ZigBee has been designed for the 868 Page 12

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
12
MHz band in Europe, the 915 MHz band in N America, Australia, etc; and the 2.4 GHz
band is now recognized to be a global band accepted in almost all countries.
3.4 IEEE 802.15.4
IEEE 802.15 is the working group 15 of the IEEE 802 which specializes in Wireless PAN standards.
It includes four task groups (numbered from 1 to 4):
Task group 1 (WPAM/Bluetooth) deals with Bluetooth, having produced the 802.15.1
standard, published on June 14, 2002. It includes a medium access control and physical
layer specification adapted from Bluetooth 1.1.
Task group 2 (coexistence) deals with coexistence of Wireless LAN (802.11) and Wireless
PAN.
Task group 3 is in fact two groups: 3 (WPAN High Rate) and 3a (WPAN Alternate Higher
Rate), both dealing with high-rate WPAN standards (20 Mbit/s or higher).
Task group 4 (WPAN Low Rate) deals with low rate but very long battery life (months or
even years). The first edition of the 802.15.4 standard was released in May 2003. In
March 2004, after forming Task Group 4b, task group 4 put itself in hibernation.
The new Task Group 4b aims at clarifying and enhancing specific parts of the Task Group 4
standard.
3.5 Components of IEEE 802.15.4
IEEE 902.15.4 networks use three types of devices.
The network coordinator maintains the overall network knowledge. It is the most
sophisticated one of the three types and required the most memory and computing power. Page 13

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
13
The Full Function Device (FFD) supports all IEEE 802.15.4 functions and features specified
by the standard. It can function as a network coordinator. Additional memory and
computing power make it ideal for network router functions or it could be used in
network-edge devices (where the network touches the real world).
The Reduced Function Device (RFD) carries limited (as specified by the standard)
functionality to lower cost and complexity. It us generally found in network-edge
devices.
4. ZigBee/IEEE 802.15.4 “ General Characteristics
Data rates of 250 kbps (@2.4 GHz), 40 Kbps (@ 915 MHz) and 20 kbps (@868 MHz)
Optimized for low duty-cycle applications (<0.1%).
Low power (battery life multi-month to years).
Multiple topologies: star, peer-to-peer, mesh.
CSMA-CA channel access yields high throughput and low latency for low duty cycle devices
like sensors and controls.
Addressing space of 64 bits “ 18,450,000,000,000,000,000 devices (64 bit IEEE address) “
65,535 networks.
Optional guaranteed time slot for applications requiring low latency.
Fully hand-shaked protocol for transfer reliability
Range: 50m typical (5-500m based on environment).
4.1 ZigBee/IEEE 802.15.4 “ Typical Traffic types Addressed
Following are typical traffic types specified:
Periodic dataPage 14

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
14
Application defined rate (e.g. sensors)
Intermittent data
Application/external stimulus defined rate (e.g. light switch)
Repetitive low latency data
Allocation of time slots(e.g. mouse)
Each of these traffic types mandates different attributes from the MAC. The IEEE 802.15.4 MAC is
flexible enough to handle each of these types.
Periodic data can be handled using the beaconing system whereby the sensor will wake up for
the beacon, check for any messages and then go back to sleep.
Intermittent data can be handled either in a beaconless system or in a disconnected fashion.
In a disconnected operation the device will only attach to the network when it needs to
communicate saving significant energy.
Low latency applications may choose to the guaranteed time slot (GTS) option. GTS is a
method of QoS (Quality of Service) in that it allows each device a specific duration of
time each Superframe to do whatever it wishes to do without contention or latencyPage 15

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
15
5. ZigBee Protocol Stack
The ZigBee protofol stack is 1/4
th
of that of Wi-Fi and Bluetooth. It may be helpful to think of IEEE
802.15.4 as the physical radio and ZigBee as the logical network and application software.
Following the standard Open Systems Intenconnection (OSI) reference model, ZigBeeâ„¢s protocol
stack is structured in layers. The first two layers, physical (PHY) and media access (MAC) are
defined by the IEEE 802.15.4 standard as shown in the figure Ëœfig 5.1â„¢. The layers above them are
defined by the ZigBee Alliance. The IEEE working group passed the first draft of PHY and MAC in
2003.
Fig 5.1 ZigBeeâ„¢s Protocol Stack
PHY LAYER
MAC LAYER
MAC LAYER
DATA LINK LAYER
NETWORK LAYER
APPLICATION INTERFACE
APPLICATION
ZigBee or OEM
IEEE
ZigBee
AlliancePage 16

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
16
5.1 The Physical Layer (PHY)
ZigBee-compliant products operate in unlicensed bands worldwide, including 2.4 GHz (global), 902
to 928 MHz. (America) and 868 MHz (Europe). Raw data throughput rates of 250Kbps can be
achieved at 2.4 GHz (16 channels), 40 Kbps at 915 MHz (10 channels), and 20 Kbps at 868 MHz (1
channel). The transmission distance is expected to range from 10 to 75m, depending on power
output and environmental characteristics. Like Wi-Fi, ZigBee uses direct-sequence spread spectrum
in the 2.4 GHz band, with offset-quadrature phase shift keying modulation. Channel width is 2 MHz
with 5 MHz channel spacing. The 868 and 900 MHz bands also use direct-sequence spread
spectrum but with binary-phases shift keying modulation.
868/915 MHz Band Modulation
The transmitter must be capable of transmitting atleast “3dbm although this should be reduced when
possible to reduce interference to other users. The maximum allowable power will depend on local
regulatory bodies. The receiver must have a packet error rate of <1% for input signals at the antenna
connector of >-92dBm.
2450 MHz Band Modulation
The transmitter must be capable of transmitting at least “3dBm although this should be reduced
when possible to reduce interference to other users. The maximum allowable power will depend on
local regulations.
What is Direct Sequence Spread Spectrum (DSSS)?
In direct Sequence Spread Spectrum a bit is assigned a particular code spectrum that is transmitted
and on the destination node that code is replaced by that specific bit, this way assigning the code
spectrum utilizes bandwidth efficiently. Page 17

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
17
The fig 5.2. shows the operating frequencies offered by the physical layer of ZigBee protocol. The
phusical also specifies other parameters for transmission such as device types that are used.
Speading Parameters
Data Parameters
PHY
Frequency
Band
Channel
Numbering Chip Rate Modulation Bit Rate
Symbol
Rate
Modulation
868 to 870
MHz
0
300
Kchip/s
BPSK
20 Kb/s 20 Kbaud
BPSK
868 to
915
MHz
902 to 928
MHz
1 to 10
600
Kchip/s
BPSK
40 Kb/s 40 Kbaud
BPSK
2.4 GHz
2.4 to 2.4835
GHz
11 to 26
2.0
Mchip/s
O-QPSK
250
Kb/s
62.5 Kbaud
16-ary
Orthogonal
Fig 5.2 Table showing ZigBeeâ„¢s operating frequency and modulation technologies used
Tow types of devices are defined: Full Function Device (FFD) and Reduced Function Device
(RFD). An FFD can serve as a coordinator or a regular device. It can communicate with any other
devices within its transmission range. An RFD is a simple device that associates and communicates
only with an FFD, The IEEE 802.15.4 PHY layer provides a parameter, Link Quality Indivation
(LQI), to characterize the quality of received signal. It can be the received power, the estimated
signal-to-noise-ration (SNR), or a combination of both. LQI is passed to MAC layer and finally
available to the network and upper layers. Other futures of PHY layer include the activation and
deactivation of the radio transceiver, channel selection, clear channel assessment, and
transmitting/receiving packets across physical medium.
5.2 Media Access Layer (MAC)
There are two channel access mechanisms used by MAC Layer:
Non-Beacon mode
Beacon mode
ZigBee networks can use beacon or non-beacon environments. Beacons are used to synchronize the
network devices, identify the PAN and describe the structure of the superframe. The beacon Page 18

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
18
intervals are set by the network coordinator and vary from 15ms to over 4 minutes. Sixteen equal
time slots are allocated between beacons are message delivery. The channel access in each time slot
is contention-based. However, the network coordinator can dedicate up to seven guaranteed time
slots for non contention based or low-latency delivery.
The non-beacon mode is a simple, traditional multiple-access system used in simple peer and near-
pear networks. It operates like a two-way radio network, where each client is autonomous and can
initiate a conversation at will, but could interfere with others unintentionally. The recipient may not
here the call or the channel might already be in use
Beacon Mode is a mechanism for controlling power consumption in extended networks such as
cluster tree or mesh. It enables all the clients to know when to communicate with each other. Here,
the two-way radio network has a central dispatcher that manages the channel and arranges the calls.
The primary value of beacon mode is that it reduces the systemâ„¢s power consumption
Non-beacon mode is typically used for security systems where client units, such as intrusion sensors,
motion detectors, and glass-break detectors, sleep 99.999% of the time.
Remote units wake up on a regular, yet random, basis to announce their continued presence in the
network. When an event occurs, the sensor wakes up instantly and transmits the alert (Somebody is
on the front porch). The network coordinator, powered from the main source, has its receiver on all
the time and can therefore wait to hear from each of these stations. Since the network coordinator
has an infinite source of power it can allow clients to sleep for unlimited periods of time, enabling
them to save power.
Beacon mode is more suitable when the network coordinator is battery-operated. Client units listen
for the network coordinatorâ„¢s beacon (broadcast at intervals between 0.015 and 252 s). A client
registers with the coordinator and looks for any messages directed to it. If no messages are pending,
the client returns to sleep, awaking on a schedule specified by the coordinator. Once the client
communications are completed, the coordinator itself returns to sleep. Page 19

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
19
This timing requirement may have an impact on the cost of the timing circuit in each end device.
Longer intervals of sleep mean that the timer must be more accurate or turn on earlier to make sure
that the beacon is heard, both of which will increase receiver power consumption. Longer sleep
intervals also mean the timer must improve the quality of the timing oscillator circuit (which
increases cost) or control the maximum period of time between because to not exceed 252s, keeping
oscillator circuit costs low.
5.2.1 Frame Structure
The frame structures have been designed to keep the complexity to minimum while at the same time
making them sufficiently robust for transmission on a noisy channel. Each successive protocol layer
adds to the structure with layer-specific headers and footers.
The IEEE 802.15.4 MAC defines four frame structures:
A beacon frame, used by a coordinator to transmit beacons. The beacon frame wakes up
client devices, which listen for their address and go back to sleep if they donâ„¢t receive it.
Beacons are important for mesh and cluster-tree networks to keep all the nodes
synchronized without requiring those nodes to consume precious battery energy by
listening for long periods of time.
A data frame, used for all transfers of data. The data frame provides a payload of up to 104
bytes. The frame is numbered to ensure that all packets are tracked. A frame-check
sequence ensures that packets are received without error. This frame structure improves
reliability in difficult conditions. This frame is shouwn in fig. 5.3.
An acknowledgment frame, used for confirming successful frame reception It provides
feedback from the receiver to the sender confirming that the packet was received without
error. The device takes advantage of specified quiet time between frames to send a
short packet immediately after the data-packet transmission.
A MAC command frame, used for handling all MAC peer entity control transfers. A Mac
command frame provides the mechanism for remote control and configuration of clientPage 20

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
20
nodes. A centralized network manager uses MAC to configure individual clientsâ„¢
command frames no matter how large the network
The data frame is illustrated below in fig 5.3:
Fig 5.3 ZigBeeâ„¢s Data Frame
The Physical Protocol Data Unit is the total information sent over the air. As shown in the
illustration above the Physical layer adds the following overhead:
Preamble sequence
:
4 Octets
Start of Frame Delimiter
:
1 Octet
Frame Length
:
1 Octet
The MAC adds the following overhead:
Frame control
:
2 Octets
Data Sequence Number
:
1 Octet
Address Information
:
4 to 20 OctetsPage 21

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
21
Frame Check Sequence
:
2 Octets
The total overhead for a single packet is therefore 15 “ 31 octets (120 bits); depending upon the
addressing scheme used (short or 64 bit addresses). These numbers do not include any security
overhead.
5.2.2 Super Frame Structure
The LR-WPAN standard allows the optional use of a superframe structure. The format of the
superframe is defined by the coordinator. The superframe is bounded by network beacons, is sent by
the coordinator and is divided into 16 equally sized slots as shown in fig 5.4. The beacons are used
to synchronize the attached devices, to identify the PAN and to describe the structure of the
superframes. Any device wishin to communicate during the contention access period (CAP)
between two beacons shall compete with other devices using a slotted CSMA-CA mechanism. All
transactions shall be completed by the time of the next network beacon.
Fig. 5.4 ZigBeeâ„¢s super frame structure bounded by two beacons
For the low latency applications or applications requiring specific data bandwidth, the PAN
coordinator may dedicate portions of the active superframe to that application. These portions are
called guaranteed time slots (GTSs). The guaranteed time slots comprise the contention free period
(CFP), which always appears at the end of the active superframe starting at a slot boundaryPage 22

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
22
immediately following the CAP, as shown in fig. 5.5. the PAN coordinator may allocate up to seven
of these GTSs and a GTS may occupy more than one slot period. However, a sufficient portion of
the CAO shall remain for contention-based access of other networked devices or new devices
wishing to join the network. All contention-based transactions shall be complete before the CFP
begins. Also each device transmitting in a GTS shall ensure that its transaction is complete before
the time of the next GTS or the end of the CFP.
Fig. 5.5 ZigBeeâ„¢s superframe structure with contention access and free period
5.3 Network and Security Layer (NWK)
The NWK layer associates or dissociates devices using the network coordinator implements security,
and routes frames to their intended destination. In addition, the NWK layer of the network
coordinator is responsible for starting a new network and assigning an address to newly associated
devices.
The NWK layer supports multiple network topologies including star, cluster tree, and mesh as
shown in fig 5.6 and fig 5.7. In a star topology, one of the FFD-type devices assumes the role of
network coordinator and is responsible for initiating and maintaining the devices on the network.
All other devices, known as end devices, directly communicate with the coordinator. Page 23

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
23
Fig. 5.6 Star and pear-to-pear network topology
In a mesh topology, the ZigBee coordinator is responsible for starting the network and for choosing
key network parameters, but the network may be extended through the use of ZigBee routers. The
routing algorithm uses a request-response protocol to eliminate sub-optimal routing. Ultimate
network size can reach 264 nodes (more than weâ„¢ll probably need). Using local addressing, you can
configure simple networks of more than 65,000 (2
16
) nodes, thereby reducing address overhead. Page 24

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
24
Pan Coordinator
Cluster Head
Device
Fig 5.7 Cluster tree topology
5.4 Application Layer.
The ZigBee application layer consists of the APS sub-layer, the ZDO and the manufacturer-defined
application objects. The responsibilities of the APS sub-layer include maintaining tables for
binding, which is the ability to match two devices together based on their services and their needs,
and forwarding messages between bound devices. Another responsibility of the APS sub-layer is
discovery, which is the ability to determine which responsibilities of the ZDO include defining the
role of the device within the network (e.g. ZigBee coordinator or end device), initiating and/or
responding to binding requests and establishing a secure relationship between network devices. The
manufacturer-defined application objects implement the actual applications according to the ZigBee-
defined application descriptions. Page 25

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
25
5.4.1 ZigBee Device Object
Defines the role of the device within the network (e.g. ZigBee coordinator or end device)
Initiates and/or responds to binding requests
Establishes a secure relationship between network devices selecting one of ZigBeeâ„¢s security
methods such as public key, symmetric key etc.
5.4.2 Application Support Layer
This layer provides the following services:
Discovery: The ability to determine which other devices are operating in the personal operating
space of a device.
Binding: The ability to match two or more devices together based on their services and their needs
and forwarding messages between bound devices.
The General Operation Framework (GOF) is a glue layer between applications and rest of the
protocol stack. The GOF currently covers various elements that are common for all devices. It
includes sub-addressing and addressing modes and device descriptions, such as type of device,
power source, sleep modes, and coordinators using an object model, the GOF specifies methods,
events, and data formats that are used by application profiles to construct set/get commands and their
responses.
Actual application profiles are defined in the individual profiles of the IEEEâ„¢s working groups.
Each ZigBee device can support up to 30 different profiles. Currently, only one profile, Commercial
and Residential Lighting, is defined. It includes switching and dimming load controllers,
corresponding remote-control devices, and occupancy and light sensors.
6. ZigBee Security
When security of MAC layer frames is desired, ZigBee uses MAC layer security to secure MAC
command, beacon, and acknowledgment frame. ZigBee may secure messages transmitted overPage 26

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
26
single hop using secured MAC data frames, but for multi-hop messaging ZigBee relies upon upper
layers (such as the NWK layer) for security. The MAC layer uses the Advanced Encryption
Standard (AES) as its core cryptographic algorithm and describes a variety of security suites that use
the AES algorithm. These suites can protect the confidentiality, integrity, and authenticity of MAC
frames. The MAC layer does the security processing, but the upper layers, which set up the keys
and determine the security levels to use, control this processing. When the MAC layer transmits
(receives) a frame with security enabled, it looks at the destination (source) of the frame, retrieves
the key associated with that destination (source), and then uses this key to process the frame
according to the security suite designated for the key being used. Each key is associated with a
single security suite and the MAC frame header has a bit that specifies whether security for a frame
is enabled or disabled.
7. ZigBee Applications
The ZigBee Alliance targets applications Across consumer, commercial, industrial and government
markets worldwide. Unwired applications are highly sought after in many networks that are
characterized by numerous nodes consuming minimum power and enjoying long battery lives.
ZigBee technology is designed to best suit these applications, for the reason that it enables reduced
costs of development, very fast market adoption and rapid ROI..
For the last few years, we have witnessed a great expansion of remote control devices in our day-to-
day life. Five years ago, infrared (IR) remotes for the television were the only such devices in our
homes. Now the number of devices is uncountable. This number will only increase as more devices
are controlled or monitored from a distance. To interact with all these remotely controlled devices,
we will need to put them under a single standardized control interface that can interconnect into a
network, specifically a HAN or home-area network.
ZigBee applications can be divided into the following groups.
Home networking
Industrial control and management
Human and computer interfacePage 27

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
27
Smart dust
Intrusion sensors, motion detectors and glass break detectors.
The Home is receiving a lot of attention lately as the place that could do with a lot of new
technology. Some of it seems like wishful thinking. Ideas that we want to connect all our electronic
devices at home “ from PCs, stereos, TV and DVD players to the security system, all utility meters,
microwave oven, fridge and even toaster “ to a single home network that is then connected to the
internet does not stand up to much scrutiny at this time. Why would we all want to do that?
In fact, the home networking market appears to be fragmented into four different application areas:
PC networking, connecting two or more PCs to a single broadband connection to the Internet
as well as printers and other resources that can be shared.
Home entertainment distribution, sharing content among televisions, stereos, and game
consoles around the home.
Home control, where one group of applications offers electronic control of heating, lighting
and security systems.
Home appliances, where your fridge can access recipes on the Internet or shop on your
behalf and your washing machine can call a service engineer.
Then there is Microsoftâ„¢s work on SPOT (Smart Personal Object Technology) that seems to be a
way for Microsoft to try to Improve everyday household objects like alarm clocks, key chains ad
pens.
Of these, PC networking is clearly in the ascendancy at present, as a direct result of the rollout of
broadband connections to the home. The second typically involves connecting the TC to the Stereo
system, for example, and looks a little less certain as a mass market. It may well pick up steam
though also as a result of broadband connections “transferring those music and video files from the
PC to the home entertainment system perhaps. Page 28

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
28
Industrial automation includes extending existing manufacturing and process control systems
reliably and improve asset management by continuously monitoring critical equipment.
Using ZigBee we can reduce energy costs through optimized manufacturing process and
to identify inefficient operation or poorly performing equipment.
Smart dust an emerging technology can be used for various purposes such as surveillance,
military purposes, weather monitoring and many other things which are still beyond reach.
The goal of the Smart Dust project is to build a self-contained, millimeter-scale sensing and
communication platform for a massively distributed sensor network. This device will be
around the size of a grain of sand and will contain sensors, computational ability, bi-
directional wireless communications, and a power supply, while being inexpensive
enough to deploy by the hundreds. Smart Dust may not be the subject matter of science
fiction any longer “ the advent of ZigBee and other wireless protocols suitable for sensor
networks is pushing the technology to the next level. Page 29

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
29
8. Conclusion
Bluetooth has already matured and graduated to version 1.2 after its initial hype. Lots of products
compliant to Bluetooth version 1.1 are available on the market. Will ZigBee be able to compete
with Bluetooth in the market? And if yes, will it replace Bluetooth? This question is asked by the
people where since ZigBee came to the market. We have already seen all the aspects of both
ZigBee and Bluetooth. And hence can be concluded that ZigBee and Bluetooth are two solutions for
two different application areas. The differences are from their approach to their desired application.
Bluetooth has addressed a voice application by embodying a fast frequency hopping system with a
master slave protocol. ZigBee has addressed sensors, controls, and other short message applications
by embodying a direct sequence system with a star or peer-to-peer protocols. Minorchanges to
Bluetooth or ZigBee wonâ„¢t change their inherent behaviour or characteristics. The different
behaviours come from architectural differences. Page 30

ZigBee: Next Generation Wireless Network
Department of Computer Science, CUSAT
30
9. Bibliography
[1]
http://www.standards.ieee.org
[2]
http://www.sigbeeen/about/initial_market...p_home.asp
[3]
http://www.zigbeeen/documents/zigbeeoverview4.pdf
[4]
http://www.palowirelesszigbee/tutorials.asp
[5]
http://www.zigbeeen/resources/031418r00Z...nology.doc
[6]
http://en.wikipediawiki/Zigbee
[7]
Behrouz A. Frouzan, Data Communication, Third Edition, Tata McGraw-Hill Publishing
company Limitted, 2004
[8]
Andrew S. Tenenbaum, Computer Networks, Fourth Edition Pearson Publication
Limited, 2003
[9]
William Stalling, Wireless Communication and Networks, Fourth Edition, Pearson
Publication Limited, 2004
[10]
James Kurose & Keith W. Ross, Computer Networks, Fourth Edition, Pearson
Publication Limited, 2

Please Use Search http://seminarprojects.com/search.php wisely To Get More Information About A Seminar Or Project Topic
24-04-2010, 11:03 AM
Post: #2
RE: Seminar Report On ZigBee: Next Generation Wireless Network

.ppt  ZigBee.ppt (Size: 2.22 MB / Downloads: 1529)

.ppt  zigbee seminar.ppt (Size: 1.83 MB / Downloads: 1233)

ZIGBEE WIRELESS VEHICLE IDENTIFICATION
AND
AUTHENTICATION SYSTEM


Presented By:
BY
G.JAYARAM




CONTENTS

WHAT IS ZIGBEE
ZIGBEE CHARACTERISTICS
SYSTEM MODEL
ELEMENTS OF ZIGBEE SYSTEM
VEHICLE IDENTIFICATION DEVICE PROFILE
COMMUNICATION BETWEEN VEHICLE TAG AND TAG READER
APPLICATIONS
CONCLUSION


WHAT IS ZIGBEE

Zig bee is a ad-hoc networking technology for LR-WPAN

It provides a high data throughput in applications
where the duty cycle is low




ZIGBEE CHARACTERISTICS

Intended for 2.45GHZ , 868MHZ and 915Mhz band


Data rates touch 250kbps , 40kbps and 20kbps


Low cost , power consumption as compared to
competing technologies




SYSTEM MODEL

ELEMENTS OF ZIGBEE SYSTEM
CENTRAL DATABASE OF AUTHORIZED VEHICLES

RF VEHICLE TAGS

RF TAG READER

RF TAG WRITER

VEHICULAR RF TAGS
RF TAG READER/WRITER
2.4GHZ RF TRANSCEIVER
LOW POWER CONSUMPTION
LOW SUPPLY VOLTAGE
DSSS IS THE MODULATION TECHNIQUE
SUITABLE FOR BOTH RFD AND FFD OPERATION


MICROCONTROLLER PIC18LF4620

ANTENNA (INVERTED F-TYPE)
VEHICLE IDENTIFICATION DEVICE PROFILE
COMMUNICATION BETWEEN VEHICLE TAG AND TAG READER
APPLICATIONS

TOLL TAX
DSRC
ELECTRONIC VEHICLE IDENTIFICATION
INDUSTRIES

CONCLUSION

PROTO TYPE OF THE PROPOSED SYSTEM WAS FIELD TESTED


SUCCESSFULLY DEMONSTRATED AT RATMALANA AIR-FORCE BASE

Please Use Search http://seminarprojects.com/search.php wisely To Get More Information About A Seminar Or Project Topic
01-05-2010, 07:44 PM
Post: #3
RE: Seminar Report On ZigBee: Next Generation Wireless Network

.doc  ZigBee report.doc (Size: 567.5 KB / Downloads: 919)


1. Introduction
ZigBee is a communication standard that provides a short-range coast effective networking capability. It has bee developed with the emphasis on low-coast battery powered application such as building automation industrial and commercial control etc. Zigbee has been introduced by the IEEE and the zigbee alliance to provide a first general standard for these applications. The IEEE is the Institute of Electrical and Electronics Engineers. They are a non-profit organization dedicated to furthering technology involving electronics and electronic devices. The 802 group is the section of the IEEE involved in network operations and technologies, including mid-sized networks and local networks. Group 15 deals specifically with wireless networking technologies, and includes the now ubiquitous 802.15.1 working group, which is also known as Bluetooth.
The name "ZigBee" is derived from the erratic zigging patterns many bees make between flowers when collecting pollen. This is evocative of the invisible webs of connections existing in a fully wireless environment. The standard itself is regulated by a group known as the ZigBee Alliance, with over 150 members worldwide.
While Bluetooth focuses on connectivity between large packet user devices, such as laptops, phones, and major peripherals, ZigBee is designed to provide highly efficient connectivity between small packet devices. As a result of its simplified operations, which are one to two full orders of magnitude less complex than a comparable Bluetooth device, pricing for ZigBee devices is extremely competitive, with full nodes available for a fraction of the cost of a Bluetooth node.
ZigBee devices are actively limited to a through-rate of 250Kbps, compared to Bluetoothâ„¢s much larger pipeline of 1Mbps, operating on the 2.4 GHz ISM band, which is available throughout most of the world.
ZigBee has been developed to meet the growing demand for capable wireless networking between numerous low-power devices. In industry ZigBee is being used for next generation automated manufacturing, with small transmitters in every device on the floor, allowing for communication between devices to a central computer. This new level of communication permits finely-tuned remote monitoring and manipulation. In the consumer market ZigBee is being explored for everything from linking low-power household devices such as smoke alarms to a central housing control unit, to centralized light controls.
The specified maximum range of operation for ZigBee devices is 250 feet (76m), substantially further than that used by Bluetooth capable devices, although security concerns raised over sniping Bluetooth devices remotely, may prove to hold true for ZigBee devices as well.
Due to its low power output, ZigBee devices can sustain themselves on a small battery for many months, or even years, making them ideal for install-and-forget purposes, such as most small household systems. Predictions of ZigBee installation for the future, most based on the explosive use of ZigBee in automated household tasks in China, look to a near future when upwards of sixty ZigBee devices may be found in an average American home, all communicating with one another freely and regulating common tasks seamlessly.
2. What is wireless technology
Wireless networks are becoming more pervasive, accelerated by new wireless communications technologies, inexpensive wireless equipment, and broader Internet access availability. These networks are transforming the way people use computers and other personal electronics devices at work, home, and when traveling.
There are many wireless communications technologies that can be differentiated by frequency, bandwidth, range, and applications. In this white paper, we survey these technologies, which can be broadly organized into the four categories depicted in Figure below. These categories range from wireless wide area networks (WWANs), which cover the widest geographic area, to wireless personal area networks (WPANs), which cover less than 10 meters.
Bluetooth wireless technology is the prevalent WPAN technology today. It operates in the 2.4-GHz unlicensed frequency band. Figure 2 shows its evolution from version 1.1 at a data rate of 1 Mbps to version 1.2, which improves the signaling and frequency band coexistence mechanisms. The 3-Mbps Bluetooth 2.0+ Enhanced Data Rate (EDR) was ratified in November 2004 and products are beginning to appear on the market.
Over the next three years, WPAN applications that require higher data rates may adopt the emerging high bandwidth Ultrawideband (UWB) technology. UWB provides high bandwidth by transmitting at very low power across a broad frequency spectrum. The UWB physical interface (or PHY) specification”802.15.3a” is under development in the IEEE, and a competing specification is under development by an industry working group called the Multi Band Orthogonal Frequency Division Multiplexing (OFDM) Alliance (MBOA). Initial UWB products with data rates of 100-480 Mbps are anticipated in early 2006. Future versions are expected to have data rates of up to 1 Gbps. Failure to resolve the issue of competing standards may stall the market opportunity for UWB technology. In addition, although the U.S. Federal Communications Commission (FCC) has approved a large amount of spectrum for UWB in the U.S., there are regulatory and regional policy issues outside the U.S.
An additional wireless technology that fits roughly in the WPAN category”ZigBee (802.15.4)”is optimized for low-bandwidth niche applications such as instrumentation and home automation. Zigbee is not depicted in Figure 2 because it is unlikely that it will be deployed outside these specialized applications.
Wireless Local Area Networks
(WLANs)
In contrast to WPANs, WLANs provide robust wireless network connectivity over a local area of approximately100 meters between the access point and associated clients. Today's WLANs are based on the IEEE 802.11 standard and are referred to as Wi-Fi networks. 802.11b was the first commercially successful WLAN technology. It operates in the 2.4-GHz frequency band at 11Mbps. By implementing a different data transmission method, data rates were increased to 54 Mbps in 2003with 802.11g in the 2.4-GHz band and 802.11a in the 5-Ghz band. Today, dual-band Wi-Fi access points and client network adapters that support various combinations of 802.11a, b, and g are common. Highly integrated, single-chip solutions that are smaller and require less power have enabled new designs and applications.
In addition, new standards address Wi-Fi network security. Wi-Fi Protected Access (WPA) and 802.11i (or WPA2) focus on user authentication and encryption. WPA2 employs next-generation Advanced Encryption Security (AES) encryption. A component of WPA and WPA2”the IEEE 802.1X standard”provides a port-level authentication framework. Finally, the upcoming 802.11e standard addresses quality of service (QoS). QoS enables the prioritization of latency-sensitive applications such as voice and multimedia. The Wi-Fi Alliance, an industry group responsible for certification and interoperability testing, has developed the Wi-Fi Multi- media (WMM) test specification to certify product compliance with the 802.11e standard.
The next-generation WLAN standard is IEEE 802.11n, which is currently being defined. 802.11n will be backward-compatible with 802.11a, b, and g, and will provide data rates in excess of 100 Mbps. The 802.11n performance increases stem from new Multiple-Input, Multiple-Output (MIMO) radio technology, wider radio frequency (RF) channels, and improvements to the protocol stack. MIMO enables higher data rates by increasing the number of radios and antennas in a wireless device. 802.11n is scheduled for IEEE ratification in mid-2006. Dell is leading an initiative in the Wi-Fi Alliance to launch a product certification program concurrent with ratification of the IEEE 802.11n standard.
Wireless Metro Area Networks
(WMANs)
A WMAN is a wireless communications network that covers a large geographic area such as a city or suburb. Traditionally, long-distance wireless technologies providing T1 or T3 data rates have been proprietary owned and operated by major telephone companies, in dependent local exchange carriers (ILECs), and other providers to link remote sites or large campuses. The IEEE has standardized a new set of WMAN technologies that operate in licensed and license exempt frequency bands. The best known of these technologies” IEEE 802.16d or WiMax”will operate in the 2- to11-GHz frequency range. (In the U.S., it will operate in the 2.5-, 3.5-, and 5.8-GHz frequency bands.) Its maximum data rate when operated within line of sight and under ideal conditions is 70 Mbps over 50 kilometers. Initial deployments will require an external antenna at the customer premises. A mobile version”802.16e”is planned in 2007. It is not yet clear when (or whether) telecommunications and Internet service providers will broadly deploy the required infrastructure to support either the fixed or mobile versions of Wi-Max. However, it is widely expected that WiMax deployments will lever age existing and emerging tower infrastructures and installations.
Wireless Wide Area Networks
(WWANs)
WWANs are digital cellular networks used for mobile phone and data service and operated by carriers such as Cingular Wireless, Vodafone, and Verizon Wireless WWANs provide connectivity over a wide geographical area, but, until recently, data rates have been relatively low”115 Kbps”compared to other more localized wireless technologies.
Two WWAN technologies Global System for Mobile Communications (GSM) and Code Division Multiple Access (CDMA)”dominate WWAN deployments worldwide. These two technologies are expected to evolve on parallel paths for the foreseeable future.pe standardized early on GSM. Today, GSM and its associated wireless data capability, General Packet Radio Service (GPRS) and next-generation Enhanced Data GSM Evolution (EDGE), have about two thirds of the worldwide market. These technologies have been deployed in North America, Europe, and Asia. Next-generation EDGE boosts GPRS data rates by 3“4 times. Other GSM operators, especially those that have acquired new 3G frequency spectrum, are commercializing Wideband CDMA (WCDMA), which is expected to have data rates of 2 Mbps. An extension called High-Speed Downlink Packet Access (HSDPA) is expected to be deployed starting in 2006. HSDPA will further increase these data rates to 3.6 Mbps and beyond.
CDMA technology dominates in the U.S. The CDMA2000 WWAN technology has seen strong deployments in North America, Japan, Korea, and China. The CDMA2000 single-carrier radio transmission technology (1xRTT) version has been widely deployed. The next-generation 1xEvolution-Data Optimized (1xEV-DO) is currently being aggressively deployed by Verizon Wire- less and Sprint PCS in the U.S. and will support a data rate of 2.4 Mbps. Carriers will build on EV-DO with version A of the specification, which will support even higher data rates and Voice over Internet Protocol (VoIP) calls.
3. Need of zigbee
Wireless sensor networking is one of the most exciting technology markets today. They say that over the next five to ten years, wireless sensors will have a significant impact on almost all major industries as well as our home lives. Broadly, this technology market includes application segments such as automated meter reading, home automation, building automation, container security/tracking, and many others.
Although products that span these application segments are diverse and different in how they operate and what they do, their requirements from a wireless communication technology are very similar. For example, these applications generally require low data rates and are battery powered.
The main motivations for migrating these products to wireless
communications are three-fold:
1. Installation cost “ The cost of running wires in a typical building automation project in an existing facility can be as high as 80% of the total project cost
2. Maintenance “ It is easier to configure a hot-water heater controller with a hand-held remote than a keypad in the closet.
3. New markets “ Eliminating the wire opens new markets that were previously unavailable to wired products.
In the wireless worlds of WiFi and BlueTooth, market growth was fueled by standards development that ultimately brought down the cost of the technology and ensured excellent value to the user. In that spirit, a number of companies forged an alliance to create a wireless standard for the embedded wireless market space, also called personal area networking (PAN); this standard is now called Zigbee. The list of promoting members is prominent and includes names like Honeywell, Phillips, Motorola, Freescale, Invensys, and many others.
Technically, Zigbee is a protocol standard that defines network, security, and application framework protocol software. Zigbee is designed to work on top of the IEEE 802.15.4 PHY/MAC layer standard. The IEEE 802.15.4 standard was ratified in May of 2003; to our knowledge the Zigbee standard is not at the time of this writing ratified, though we understand that it is very close.
4. What is Zigbee / 802.15.4
The IEEE 802.15.4 standard defines the PHY and MAC layers, which are used by Zigbee.
PHY description
Three frequency bands are specified, though an implementation need only operate on one of the three, the bands are:
868 MHz - for European applications
902-928 MHz - for North American applications
2.450 GHz -for world wide application
In all bands, the modulation scheme is direct sequence spread spectrum. In the
868 and 902-928 MHz bands, the transmitter is modulated using BPSK. In the
2.450 GHz band, the transmitter is modulated using offset-QPSK, which is more bandwidth efficient than BPSK.
Direct sequence spread spectrum is a technique that essentially spreads the narrow band of data over a much broader bandwidth by using a pseudo-random chipping sequence. This process provides gain at the receiver because of the correlating effect of de-spreading the data. The amount of gain is determined by the ratio of the chipping rate to the data rate. The higher the ratio, the higher the gain. This gain also provides proportional rejection of on channel interference. As the wanted signal is correlated and de-spread, the interferer is spread, increasing the level of the wanted signal and decreasing the level of the interfering carrier. The amount of rejection is determined by the spreading gain.
In the 2.450 GHz band, an 802.15.4 radio spreads the data using an 8 bit chipping sequence. Actually, the chipping sequence is 32 bits, but the data being spread is actually 4 bits, thus the 8:1 chipping ratio. The process gain in dB is calculated by multiplying ten times the log of the chipping ratio; in this case the gain is 9dB. Receiver sensitivity is specified at “85dBm; adjacent channel rejection is 0dB minimum.
In the 868 and 902-928 MHz band, an 802.15.4 radio spreads the data using a 15 bit chipping sequence. In this case, chipping ratio is 15 and spreading gain is
12dB. Receiver sensitivity is specified at -92dBm; adjacent channel rejection is 0dB minimum.
Zigbee/802.15.4 Specifications by Band
868 MHz 902-928 MHz 2.450 GHz
Data Rate 20 kbps 40 kbps 250kbps
# channels 1 10 16
TX Power -3dBm -3dBm -3dBm
RX Sensitivity -92dBm -92dBm -85dBm
Link Budget 89dB 89dB 82dB
Adjacent channel
rejection
Alternate
channel rejection
0dB 0dB 0dB
30dB 30dB 30dB
MAC Description
The 802.15.4 specification defines a very complicated MAC layer, and I will not attempt to give a detailed explanation here.802.15.4 defines two classes of implementations: full function devices (FFD) and reduced function devices (RFD).
An FFD can operate in three modes serving as a PAN coordinator, a coordinator, or a device. FFDs contain all of the features of 802.15.4 and can talk to both RFDs and FFDs. A PAN coordinator is the primary controller of the network, and it must be a FFD. There can be only one PAN controller per network. A PAN controller is required for an 802.15.4 network. A coordinator is a FFd that provides synchronization Services by transmitting beacons.
A RFD can operate only as a device. RFDs contain a subset of the features of
802.15.4 and are intended to be high-volume, low cost devices. They can be duty-cycled to reduce power consumption. RFD devices can talk only to FFDs. This means that RFDs have no routing capability, so they must be on the perimeters of a mesh network. A device is a simple end-point. A device can be a RFD or FFD. Conceptually, each network would have one FFD that acted as the PAN coordinator and several more FFDs that formed the mesh network. The majority of the nodes in the network would be low-cost RFDs. The number and position of FFDs in the network would determine the coverage of the network.
The illustration on the above shows an example Zigbee network configuration. There is one PAN coordinator, six FFD devices, and nine RFD devices. The actual mesh network is formed by the FFD devices and the PAN coordinator. The RFD devices form a point to multipoint network with FFD devices that are in range Node 8 is not connected to the network. Although it is in range of nodes 7 and 9, it cannot connect to them because all three are RFD devices. An additional FFD device would be required to connect node 8 to the network.
There in lies an inherent limitation of the Zigbee model. The number of FFD devices in the network determines the coverage area; the more FFD devices, the larger the coverage area. It is probable, given the current 802.15.4 specification, that a real-world application of Zigbee would require a high ratio of FFD devices to RFD devices to attain the required coverage, which will adversely affect the pricing model.
This also has implications in system deployment. The primary factor driving the market need is lower installation cost . Using the example just given, it is easy to see how the installation will be complicated. If a device (node 8) is installed in a location that is not in range of an FFD device, it will not be connected to the network. The installer would then be required to place an additional FFD device to serve as an intermediate router. This would have to be done by trial and error, increasing both labor and materials cost.
If this all sounds complicated, that is because it is. The 802.15.4 specification alone consumes 670 printed pages. A typical implementation requires nearly 32K of flash, and that is just for the MAC layer.
The Zigbee specification is likely to be just as large and the software implementation requires another 32K or more of flash memory.
The important aspects of the 802.15.4 standard are listed below :
82-89 dB link budget
0 dB adjacent channel rejection
10 channels @ 900 MHz, 16 channels at 2.450 GHz MHz
40kbps @ 900 MHz, 250 kbps @ 2.450 GHz
RFD devices are not a part of the mesh network
Every network requires a PAN coordinator
The coverage area is determined by both the 802.15.4 link budget and the number of FFD devices deployed
5. Benefits of zigbee
In all of its uses, ZigBee offers four inherent characteristics that are highly beneficial:
Low cost
The typical ZigBee radio is extremely cost-effective. Chipset prices can be as low as $12 each in quantities as few as 100 pieces (while the 802.15.4 and ZigBee stacks are typically included in this cost, crystals and other discrete components are not). Design-in modules fall in the neighborhood of $25 in similar quantities. This pricing provides an economic justification for extending wireless networking to even the simplest of devices.
Range and obstruction issues avoidance:
ZigBee routers double as input devices and repeaters to create a form of mesh network. If two network points are unable to communicate as intended, transmission is dynamically routed from the blocked node to a router with a clear path to the dataâ„¢s destination. This happens automatically, so that communications continue even when a link fails unexpectedly. The use of low-cost routers can also extend the networkâ„¢s effective reach; when the distance between the base station and a remote node exceeds the deviceâ„¢s range, an intermediate node or nodes can relay transmission, eliminating the need for separate repeaters
Multi-source products
As an open standard, ZigBee provides customers with the ability to choose among vendors. ZigBee Alliance working groups define interoperability profiles to which ZigBee-certified devices must adhere, and certified radio will interoperate with any other ZigBee-certified radio adhering to the same profile, promoting compatibility and the associated competition that allows the end users to choose the best device for each particular network node, regardless of manufacturer.
Low power consumption
Basic ZigBee radios operate at 1 mW RF power, and can sleep when not involved in transmission (higher RF power ZigBee radios for applications needing greater range also provide the sleep function). As this makes battery-powered radios more practical than ever, wireless devices are free to be placed without power cable runs in addition to eliminating data cable runs.
6. Technology behind zigbee
IEEE 802.15.4
The IEEE workgroup 802.15.4 has standardized the PHY and MAC, layer within WPAN (Wireless Personal Area Network) area. The primary goal for the working group within IEEE was to define the standard to meet requirements on low complexity, low cost and low power consumption.
802.15.4 MAC
The MAC sublayer provides interfaces towards the PHY and higher (Zigbee) layers. The MAC is responsible for several functions, such as: generation of acknowledgment frames, association, disassociation, security control, and some optional services such as: beacon generation and guaranteed time slot management. One aim when defining the MAC was to make the scheduling engine simple, thus improving the overall power consumption.
Channel Access
For all types of deployed networks the Carrier Sense Multiple Access Collision Avoidance (CSMA-CA) protocol is used. This method is useful to avoid unnecessary collision over the radio channel. CSMA-CA is used for all traffic except beacons, ACK frames and transmissions within a GTS.
Beacon signaling
Only a FFD has the capability of generating beacon frames in a true peer-to-peer network topology there can only be FFDs operating. One exception is when a RFD operates as a peripheral device without routing capability.
Guaranteed Time Slot (GTS)
By using GTS scheduling at the MAC level two important attributes can be achieved over the channel.
Low latency: For specific applications sensitive for delays such as alarms, PC mice, lamp switches or QoS differentiation based on application software. It is possible to reach response times down to 15 msec in GTS mode.
Bandwidth allocation:
Useful for applications that requires to generate a known data traffic rate. The higher layer protocol is responsible for assigning the traffic rate and the MAC level will grant the request.
802.15.4 PHY
The physical layer provides the interface to the wireless medium and is responsible for low-level control for link quality, energy detection, activation/deactivation of the radio transceiver etc. The PHY in 802.15.4 has three different modes of operation depending of geographically region.
The IEEE 802.15.4 PHY uses Direct Sequence Spread Spectrum (DSSS) as the transmission distances ranges from 10-100 meter (approx), depending on output power, radio environment and antenna solution.
Network Topologies
In general there exist three different network topologies:
¢ Star
¢ Cluster Tree
¢ Mesh
In this mode the PAN Coordinator is responsible for updating routing tables, transmit beacons, maintaining synchronization, routing of messages between nodes etc. within the network.
Antenna Considerations
The antenna design is often very crucial for the overall product. One requirement is often to minimize the size of the antenna, which is needed in many embedded applications for short range wireless communications. However, a small antenna may be inefficient unless attention is paid to the design of both the antenna and its placement in the product.
Choice of antenna
There are several design choices in the case of an internal antenna.
The obvious and cheapest choice is to use a substrate antenna, by using a piece of circuit board trace. One disadvantage with this solution is the relative resistive loss and the possible cross interference with components on the board and nearby ground planes.
Another choice is wire antennas where the antenna can be placed away from the board, which improves the performance. One drawback is that this solution may require tuning, due to mechanical differences and size variations. A third choice is to use ceramic antennas which offers smaller physical size than the above mentioned solutions but with a substantially higher cost.
ZigBee Alliance
The ZigBee alliance was founded in order to develop a common standard for Short Range Devices (SRD) with focus on low power consumption, ad-hoc behavior, low latency, self configurable radio nodes. The ZigBee alliance is today an association with over 50 member companies. The main focus within ZigBee is to define the routing mechanisms that together with IEEE802.15.4 will form the total solution.
General Characteristics
¢ Data rates from 20 to 250 kbps
¢ Star Topology/Peer to Peer (mesh)
¢ 255 devices / network
¢ CSMA-CA Access Scheme
¢ Enumeration (new node) ~ 15-30 ms
¢ Dual PHY (868/915 MHz, 2.4 GHz), DSSS
¢ Range: 10-100 m
¢ Low Duty Cycle (< 0 .1%, TX)
¢ Low Power Cons, +1 year battery life time
¢ Complexity: 4 -32 kB (protocol)
7. Applications
Water level sensing
Zigbee can be installed in remote location where conventional GSM modems would be out of their network coverage area, such as inside water tanks. Zigbee transceiver can be hermetically sealed with batteries and co-located with sensors. Each transceiver transmits periodically to another unit installed above ground. A GSM modem transmits the data to base.
In building control
Zigbee-enabled switches and lights can be reduce installation costs in new building by eliminating the need to route light control through the walls, and remove the need to call in qualified electrician when switches need to be relocated. Thermostats and air-conditioning placed anywhere, free of any wiring constraints.
8. Conclusion
The Zigbee solution will be available soon. It will not hit the $10 price point until 2009. The 802.15.4 radio specification has a very poor link budget; 89dB. A Zigbee based solution is not scalable; it will not work reliably with only two end-points separated by the length of a house. It is complicated and requires a significant learning curve from the engineer and significant resources from the protocol controller. The customer must form three supplier relationships; the chip vendor, the software vendor, and the microcontroller vendor.
In addition to cost, reliability, and scalability, Zigbee purports to offer other advantages over proprietary solutions such as Interoperability, Vendor independence and Common platform.
There are three separate frequency bands specified for Zigbee. If one manufacturer of heating controls chooses the 900 MHz band, and another chooses the 2.4 GHz band, the products will not operate together. Additionally, it is likely that IC vendors will add proprietary features to their 802.15.4 implementations in an effort to differentiate their product; if the OEM uses these proprietary features, the benefit of interoperability will be negated. In the end, the only way to guarantee interoperability using Zigbee is to design only 2.4GHz products using only Zigbee standard features.
9. References
Chipcon, CC2420 2.4 GHz IEEE 802.15.4 RF Transceiver Data Sheet
On World, October 2004, Wireless AMR and submetering: A market dynamics study on fixed wireless technologies
Electronic Design, The Zigbee buzz is growing: New low- power wireless standard opens powerful possibilities
On World, Wireless Sensor Networks: Mass Market
Opportunities
IEEE, 802.15.4 Part 15.4: Wireless Medium Access control
(MAC) & Physical (PHY) Layer Specifications for Low Rate Wireless Personal
Area Networks
ZigBee Open House Oslo.htm
Zigbee Alliance -- Home Page.htm
Zigbee Tutorial.htm
please read http://www.seminarprojectsThread-zigbee-networks-full-report and http://www.seminarprojectsThread-seminar-report-on-zigbee-next-generation-wireless-network for getting more information of zigbee technology

Please Use Search http://seminarprojects.com/search.php wisely To Get More Information About A Seminar Or Project Topic
07-06-2010, 08:17 PM
Post: #4
RE: Seminar Report On ZigBee: Next Generation Wireless Network

.docx  ZIGBEE TECHNOLOGY.docx (Size: 173.46 KB / Downloads: 508)
Technical
paper
presentation
on
ZIGBEE TECHNOLOGY
[h]r
Presented
by
Y.Naveen kumar
G.Siva kumar
Final year
Electronics And
Communications Engineering
Sir C.R.Reddy College Of
Engineering
Eluru-
534007

ZIGBEE TECHNOLOGY

ABSTRACT

ZigBee is one of the newest technologies enabling Wireless Personal Area
Networks (WPAN). The specification characterized by low data rates and very low
power consumption is revolutionising home networking.
ZigBee is an established set of specifications for wireless personal area
networking (WPAN), i.e. digital radio connections between computers and related
devices.
WPAN Low Rate or ZigBee provides specifications for devices that have
low data rates, consume very low power and are thus characterized by long battery life.
ZigBee makes possible completely networked homes where all devices are able to
communicate and be controlled by a single unit.

Introduction:

When you hold the TV remote and wish to use it you have to necessarily
point your control at the device. This one-way, line-of-sight, short-range communication
uses infrared (IR) sensors to enable communication and control and it is possible to
operate the TV remotely only with its control unit.
Add other home theatre modules, an air- conditioner and remotely enabled fans and lights
to your room, and you become a juggler who has to handle not only these remotes, but
also more numbers that will accompany other home appliances you are likely to use.
Now picture a home with entertainment units, security systems including
fire alarm, smoke detector and burglar alarm, air-conditioners and kitchen appliances all
within whispering distance from each other and imagine a single unit that talks with all
the devices, no longer depending on line-of-sight, and traffic no longer being one-way.
This means that the devices and the control unit would all need a common
standard to enable intelligible communication. ZigBee is such a standard for embedded
application software and has been ratified in late 2004 under IEEE 802.15.4 Wireless
Networking Standards.ZigBee is an established set of specifications for wireless personal
area networking (WPAN), i.e., digital radio connections between computers and related
devices. This kind of network eliminates use of physical data buses like USB and
Ethernet cables. The devices could include telephones, hand- held digital assistants,
sensors and controls located within a few meters of each other.
ZigBee is one of the global standards of communication protocol formulated by the
relevant task force under the IEEE 802.15 working group. The fourth in the series,
WPAN Low Rate/ZigBee is the newest and provides specifications for devices that have
low data rates, consume very low power and are thus characterized by long battery life.
Other standards like Bluetooth and IrDA address high data rate applications such as
voice, video and LAN communications.
The ZigBee Alliance has been set up as an association of companies working together to
enable reliable, cost-effective, low-power, wirelessly networked, monitoring and control
products based on an open global standard.Once a manufacturer enrolls in this Alliance
for a fee, he can have access to the standard and implement it in his products in the form
of ZigBee chipsets that would be built into the end devices. Philips, Motorola, Intel, HP
are all members of the Alliance . The goal is to provide the consumer with ultimate
flexibility, mobility, and ease of use by building wireless intelligence and capabilities into
every day devices. ZigBee technology will be embedded in a wide range of products and
applications across consumer, commercial, industrial and government markets
worldwide. For the first time, companies will have a standards-based wireless platform
optimized for the unique needs of remote monitoring and control applications, including
simplicity, reliability, low-cost and low-power.
The target networks encompass a wide range of devices with low data rates in
the Industrial, Scientific and Medical (ISM) radio bands, with building-automation
controls like intruder/fire alarms, thermostats and remote (wireless) switches, video/audio
remote controls likely to be the most popular applications. So far sensor and control
devices have been marketed as proprietary items for want of a standard. With acceptance
and implementation of ZigBee, interoperability will be enabled in multi-purpose, self-
organizing mesh networks

Architecture:

Though WPAN implies a reach of only a few meters, 30 feet in the case of
ZigBee, the network will have several layers, so designed as to enable intrapersonal
communication within the network, connection to a network of higher level and
ultimately an uplink to the Web.
The ZigBee Standard has evolved standardized sets of solutions, called Ëœlayers'.
These layers facilitate the features that make ZigBee very attractive: low cost, easy
implementation, reliable data transfer, short-range operations, very low power
consumption and adequate security features.
1. Network and Application Support layer : The network layer permits growth of
network sans high power transmitters. This layer can handle huge numbers of nodes. This
level in the ZigBee architecture includes the ZigBee Device Object (ZDO), user-defined
application profile(s) and the Application Support (APS) sub- layer.
The APS sub- layer's responsibilities include maintenance of tables that enable matching
between two devices and communication among them, and also discovery, the aspect that
identifies other devices that operate in the operating space of any device.
The responsibility of determining the nature of the device (Coordinator / FFD or RFD) in
the network, commencing and replying to binding requests and ensuring a secure
relationship between devices rests with the ZDO (Zigbee Define Object). The user-
defined application refers to the end device that conforms to the ZigBee Standard.
2. Physical (PHY) layer : The IEEE802.15.4 PHY physical layer accommodates high
levels of integration by using direct sequence to permit simplicity in the analog circuitry
and enable cheaper implementations.
3. Media access control (MAC) layer : The IEEE802.15.4 MAC media access control
layer permits use of several topologies without introducing complexity and is meant to
work with large numbers of devices.
Figure 1: IEEE 802.15.4 / ZigBee Stack Architecture

Device Types:

There are three different ZigBee device types that operate on these layers in any self-
organizing application network. These devices have 64-bit IEEE addresses, with option
to enable shorter addresses to reduce packet size, and work in either of two addressing
modes “ star and peer-to-peer.
1. The ZigBee coordinator node : There is one, and only one, ZigBee coordinator in
each network to act as the router to other networks, and can be likened to the root of a
(network) tree. It is designed to store information about the network.
2. The full function device FFD : The FFD is an intermediary router transmitting data
from other devices. It needs lesser memory than the ZigBee coordinator node, and entails
lesser manufacturing costs. It can operate in all topologies and can act as a coordinator.
3. The reduced function device RFD : This device is just capable of talking in the
network; it cannot relay data from other devices. Requiring even less memory, (no flash,
very little ROM and RAM), an RFD will thus be cheaper than an FFD. This device talks
only to a network coordinator and can be implemented very simply in star topology.

ZigBee Characteristics:

The focus of network applications under the IEEE 802.15.4 / ZigBee standard include the
features of low power consumption, needed for only two major modes (Tx/Rx or Sleep),
high density of nodes per network, low costs and simple implementation.
These features are enabled by the following characteristics
¢ 2.4GHz and 868/915 MHz dual PHY modes. This represents three license- free bands:
2.4-2.4835 GHz, 868-870 MHz and 902-928 MHz. The number of channels allotted to
each frequency band is fixed at sixteen (numbered 11-26), one (numbered 0) and ten
(numbered 1-10) respectively. The higher frequency band is applicable worldwide, and
the lower band in the areas of North America, Europe, Australia and New Zealand .
¢ Low power consumption, with battery life ranging from months to years. Considering
the number of devices with remotes in use at present, it is easy to see that more numbers
of batteries need to be provisioned every so often, entailing regular (as well as timely),
recurring expenditure. In the ZigBee standard, longer battery life is achievable by either
of two means: continuous network connection and slow but sure battery drain, or
intermittent connection and even slower battery drain.
¢ Maximum data rates allowed for each of these frequency bands are fixed as 250 kbps
@2.4 GHz, 40 kbps @ 915 MHz, and 20 kbps @868 MHz.
¢ High throughput and low latency for low duty-cycle applications (<0.1%)
¢ Channel access using Carrier Sense Multiple Access with Collision Avoidance (CSMA
- CA)
¢ Addressing space of up to 64 bit IEEE address devices, 65,535 networks
¢ 50m typical range
¢ Fully reliable hand-shaked data transfer protocol.
¢ Different topologies as illustrated below: star, peer-to-peer, mesh
Figure 2: ZigBee Topologies

Traffic Types:

ZigBee/IEEE 802.15.4 addresses three typical traffic types. IEEE 802.15.4 MAC can
accommodate all the types.
1. Data is periodic. The application dictates the rate, and the sensor activates, checks for
data and deactivates.
2. Data is intermittent. The application, or other stimulus, determines the rate, as in the
case of say smoke detectors. The device needs to connect to the network only when
communication is necessitated. This type enables optimum saving on energy.
3. Data is repetitive, and the rate is fixed a priori. Depending on allotted time slots, called
GTS (guaranteed time slot), devices operate for fixed durations.
ZigBee employs either of two modes, beacon or non-beacon to enable the to-and- fro data
traffic. Beacon mode is used when the coordinator runs on batteries and thus offers
maximum power savings, whereas the non-beacon mode finds favour when the
coordinator is mains-powered.
In the beacon mode, a device watches out for the coordinator's beacon that gets
transmitted at periodically, locks on and looks for messages addressed to it. If message
transmission is complete, the coordinator dictates a schedule for the next beacon so that
the device Ëœgoes to sleep'; in fact, the coordinator itself switches to sleep mode.
While using the beacon mode, all the devices in a mesh network know when to
communicate with each other. In this mode, necessarily, the timing circuits have to be
quite accurate, or wake up sooner to be sure not to miss the beacon. This in turn means an
increase in power consumption by the coordinator's receiver, entailing an optimal
increase in costs.
Figure 3: Beacon Network Communication
The non-beacon mode will be included in a system where devices are Ëœasleep' nearly
always, as in smoke detectors and burglar alarms. The devices wake up and confirm their
continued presence in the network at random intervals.
On detection of activity, the sensors Ëœspring to attention', as it were, and transmit to the
ever-waiting coordinator's receiver (since it is mains-powered). However, there is the
remotest of chances that a sensor finds the channel busy, in which case the receiver
unfortunately would Ëœmiss a call'.
Figure 4: Non-Beacon Network Communication

Network Model:

The functions of the Coordinator, which usually remains in the receptive mode,
encompass network set- up, beacon transmission, node management, storage of node
information and message routing between nodes.
The network node, however, is meant to save energy (and so Ëœsleeps' for long periods)
and its functions include searching for network availability, data transfer, checks for
pending data and queries for data from the coordinator.
Figure 5: ZigBee Network Model
For the sake of simplicity without jeopardising robustness, this particular IEEE standard
defines a quartet frame structure and a super- frame structure used optionally only by the
coordinator.

The four frame structures are

Beacon frame for transmission of beacons
Data frame for all data transfers
Acknowledgement frame for successful frame receipt confirmations
MAC command frame
These frame structures and the coordinator's super- frame structure play critical roles in
security of data and integrity in transmission.
All protocol layers contribute headers and footers to the frame structure, such that the
total overheads for each data packet range are from 15 octets (for short addresses) to 31
octets (for 64-bit addresses).
The coordinator lays down the format for the super- frame for sending beacons after every
15.38 ms or/and multiples thereof, up to 252s. This interval is determined a priori and the
coordinator thus enables sixteen time slots of identical width between beacons so that
channel access is contention- less. Within each time slot, access is contention-based.
Nonetheless, the coordinator provides as many as seven GTS (guaranteed time slots) for
every beacon interval to ensure better quality.

Technology Comparisons:

The Why ZigBee question has always had an implied, but never quite
worded follower phrase ¦when there is Bluetooth. A comparative study of the two can
be found .
The bandwidth of Bluetooth is 1 Mbps, ZigBee's is one- fourth of this
value. The strength of Bluetooth lies in its ability to allow interoperability and
replacement of cables, ZigBee's, of course, is low costs and long battery life.
In terms of protocol stack size, ZigBee's 32 KB is about one-third of the
stack size necessary in other wireless technologies (for limited capability end devices, the
stack size is as low as 4 KB).
Most important in any meaningful comparison are the diverse application
areas of all the different wireless technologies. Bluetooth is meant for such target areas as
wireless USB's, handsets and headsets, whereas ZigBee is meant to cater to the sensors
and remote controls market and other battery operated products.
In a gist, it may be said that they are neither complementary standards
nor competitors, but just essential standards for different targeted applications. The
earlier Bluetooth targets interfaces between PDA and other device (mobile phone / printer
etc) and cordless audio applications.
The IEEE 802.15.4“based ZigBee is designed for remote controls and
sensors, which are very many in number, but need only small data packets and, mainly,
extremely low power consumption for (long) life. Therefore they are naturally different
in their approach to their respective application arenas.
Applications:

The ZigBee Alliance targets applications "across consumer,
commercial, industrial and government markets worldwide". Unwired applications are
highly sought after in many networks that are characterized by numerous nodes
consuming minimum power and enjoying long battery lives.ZigBee technology is
designed to best suit these applications, for the reason that it enables reduced costs of
development, very fast market adoption, and rapid ROI.
Airbee Wireless Inc has tied up with Radiocrafts AS to deliver "out-of-the-box"
ZigBee-ready solutions; the former supplying the software and the latter making the
module platforms. With even light controls and thermostat producers joining the ZigBee
Alliance, the list is growing healthily and includes big OEM names like HP, Philips,
Motorola and Intel.
With ZigBee designed to enable two-way communications, not
only will the consumer be able to monitor and keep track of domestic utilities usage, but
also feed it to a computer system for data analysis.

Conclusion:

A recent analyst report issued by West Technology Research Solutions estimates
that by the year 2008, "annual shipments for ZigBee chipsets into the home automation
segment alone will exceed 339 million units," and will show up in "light switches, fire
and smoke detectors, thermostats, appliances in the kitchen, video and audio remote
controls, landscaping, and security systems."
Futurists are sure to hold ZigBee up and say, "See, I told you so". The ZigBee Alliance is
nearly 200 strong and growing, with more OEM's signing up. This means that more and
more products and even later, all devices and their controls will be based on this standard.
Since Wireless personal Area Networking applies not only to household devices, but also
to individualised office automation applications, ZigBee is here to stay. It is more than
likely the basis of future home-networking solutions.

Please Use Search http://seminarprojects.com/search.php wisely To Get More Information About A Seminar Or Project Topic
22-06-2010, 01:35 PM
Post: #5
RE: Seminar Report On ZigBee: Next Generation Wireless Network
ZigBee and IEEE 802.15.4
ZigBee technology is a low data rate, low power consumption, low cost, wireless networking proto¬col targeted towards automation and remote control applications. IEEE 802.15.4 committee started working on a low data rate standard a short while later. Then the ZigBee Alliance and the IEEE decided to join forces and ZigBee is the commercial name for this technology.
ZigBee is expected to provide low cost and low power connectivity for equipment that needs battery life as long as several months to several years but does not require data transfer rates as high as those enabled by Bluetooth. In addition, ZigBee can be implemented in mesh networks larger

than is possible with Bluetooth. ZigBee compliant wireless devices are expected to transmit 10-75 meters, depending on the RF environment and the power output consumption required for a given application, and will operate in the unlicensed RF worldwide(2.4GHz global, 915MHz Americas or 868 MHz Europe). The data rate is 250kbps at 2.4GHz, 40kbps at 915MHz and 20kbps at 868MHz.
IEEE and ZigBee Alliance have been working closely to specify the entire protocol stack. IEEE 802.15.4 focuses on the specification of the lower two layers of the protocol(physical and data link layer). On the other hand, ZigBee Alliance aims to provide the upper layers of the protocol stack (from network to the application layer) for interoperable data networking, security services and a range of wireless home and building control solutions, provide interoperability compliance testing, marketing of the standard, advanced engineering for the evolution of the standard. This will assure consumers to buy products from different manufacturers with confidence that the products will work together


read full report
http://citeseerx.ist.psu.edu/viewdoc/dow...1&type=pdf

Please Use Search http://seminarprojects.com/search.php wisely To Get More Information About A Seminar Or Project Topic
16-07-2010, 10:21 PM
Post: #6
RE: Seminar Report On ZigBee: Next Generation Wireless Network

.pdf  zigbee main seminar report.pdf (Size: 265.47 KB / Downloads: 628)
Third Year Seminar Report
Zigbee

Submitted by
Ruchita Jadhav T.E. Roll No.: 33 Year: (2009-2010)
Guide Prof .Mrs.P.D.Bhamre
Co-Guide Prof. V.S.Bharambe
Department of Information Technology
K.K.Wagh Institute of Engineering Education and Research
Nashik -422003
Abstract

Zigbee is a new Wireless sensor network technology characteristic of less distance and low speed. It can be used in some special situation for signal collection, processing and trans-mitting.ZigBee is a technology now being deployed for wireless sensor networks. A sensor network is an infrastructure comprised of sensing, computing and communications elements that allows the administrator to instrument, observe and react to events and phenomena in a specified environment.Typical applications include, but are not limited to, data collection, monitoring, surveillance and medical telemetry.
ZigBee is the set of specifications built around the IEEE 802.15.4 wireless protocol. ZigBee technology is a low data rate, low power consumption, low cost, wireless networking protocol targeted towards automation and remote control applications
ZigBee is a communication protocol that uses small, low-power digital radio signals based on the IEEE 802.15.4 standard.ZigBee operates in
ISM radio bands: In USA 915 MHz, in Europe 868 MHz and 2.4 GHz in other parts of the globe. In the 2.4 GHz band there are 16 ZigBee channels, with each channel requiring 2 MHz of bandwidth.
The most capable ZigBee node type is said to require only about 10typical Bluetooth or Wireless Internet node, while the simplest nodes are about 2However, actual code sizes are much higher, closer to 50transmission range of Zigbee is over 50 meters and speed is 20-250KB/s, it needs only 32K of system resources. It is simple, effective and cheaper than other WPANs like bluetooth, WiFi. ZigBee solves the needs of remote monitoring and control, and sensor network applications. It takes full advantage of a powerful physical radio specified by IEEE802.15.4, adding logical network, security and application software to the specification.

Chapter 1
Introduction
1.1 What is Zigbee?

Zigbee is a Technological Standard Created for Control and Sensor Networks based on the IEEE 802.15.4 specification for wireless personal area network .It is a New wireless technology that has application in various fields.Zigbee benfits are low cost and Range and obstruction issues avoidance.The main features of this standard are network flexibility, low cost, very low power consumption, and low data rate in an adhoc self-organizing network among inexpensive fixed, portable and moving devices.

1.2 Origin of word Zigbee

The erratic, zig-zagging patterns of bees between flowers while collecting pollens from the flowers Symbolizes communication between nodes in a mesh network of Zigbee network.The network components are analogous to queen bee, drones, worker bees.
Process on ZigBee-style networks began in 1998, when many engineers realized that both WiFi and Bluetooth were going to be unsuitable for many applications. In particular, a need for self-organizing ad-hoc digital radio networks arose.
ZigBee is very low cost, low power consumption, two ways, wireless communication pro¬tocol. It adopts IEEE 802.15.4, as its lower protocol layers: the physical layer (PHY) and medium Access Control (MAC) portion of data link layer (DLL) takes care of network, secu¬rity and upper application issues. The relative organization of the IEEE radio with respect to the ZigBee functionality. Wireless systems mostly use cell phone-style radio links, using point-to-point or point-to- multipoint transmission. These traditional wireless formats have drawbacks like rigid structure, signal dropping and meticulous planning requirements.
1.3 Zigbee Alliance
It is association of companies working together to enable reliable ,cost effective, low power ,wirelessly networked ,monitoring and control products based on an open global standard.

1.4 Need of Zigbee

ZigBee was created to satisfy the market's need of a standards-based wireless network that is cost-effective,supports low data rates,low power consumption,secure and reliable.
Why ZigBee? Let us compare it to its closest competitor, Bluetooth. If we want to build a remote battery powered Bluetooth node, we need at least 250K of memory for the code and stack, and transmission speed of 720KB/s up to range of approximately 10 meters , if there are no cordless phones, VCRs etc around. The battery life will be 7 days. Now, compare that to
ZigBee. Though it is a lower-speed wireless protocol that's targeted at transmission speeds of 20-250KB/s, it has a transmission range of over 50 meters. Battery life is 2 years and 32K of system resources is required. This is simple, effective, and very practica
ZigBee is the only wireless standards-based technology that addresses the unique needs of remote monitoring control, and sensory network applications,enables broad-based deploy¬ment of wireless networks with low cost, low power solutions.
1.5 Wireless sensor networking is one of the most ex-
citing technology markets today
[4]. They say that over the next five to ten years, wireless sensors will have a significant impact on almost all major industries as well as our home lives. Broadly, this technology market includes application segments such as automated meter reading, home automation, building automation, container security/tracking, and many others.
Although products that span these application segments are diverse and different in how they operate and what they do, their requirements from a wireless communication technology are very similar. For example, these applications generally require low data rates and are battery powered.
The main motivations for migrating these products to wireless communications are three¬fold:
1. Installation cost - The cost of running wires in a typical building automation project in an existing facility can be as high as 80project cost [4]. 2. Maintenance - It is easier to configure a hot-water heater controller with a hand-held remote than a keypad in the closet. 3. New markets - Eliminating the wire opens new markets that were previously unavailable to wired products.
Zigbee [3, 5] was introduced as an alternative to Bluetooth for devices with low power consumption requirements and applications of lower bit rates. Although products based on the Bluetooth standard are often capable of operating at greater distances, the targeted operational area is the one around an individual, (e.g. within a 10 meters diameter). Blue¬tooth utilizes a short range radio link that operates in the 2.4 GHz industrial scientific and medical (ISM) band similar to WLAN. However, the radio link in Bluetooth is based on frequency hop spread spectrum. Although at any point in time, the Bluetooth signal oc¬cupies only 1MHz, the signal changes the center frequency (or hops) deterministically at a rate of 1600Hz. Bluetooth hops over 79 center frequencies, so over time the Bluetooth signal actually occupies 79MHz. The new short range, low power, low rate wireless networking protocol, Zigbee, complements the high data rate technologies such as WLAN and open the door for many new applications. This standard operates at three bands, the 2.4 GHz band with a maximum rate of 250 kbps, the 915 MHz band with a data rate of 40 kbps, and the 868 MHz band with a data rate of 20 kbps. While Bluetooth devices are better suited for fairly high rate sensor and voice applications, Zigbee is better suited for low rate sensors and devices used for control applications that do not require high data rate but must have long battery life, low user interventions and mobile topology. Some of these applications are in the fields of medicine
ZigBee is a low-cost, low-power, wireless mesh networking proprietary standard. The low cost allows the technology to be widely deployed in wireless control and monitoring applica¬tions, the low power-usage allows longer life with smaller batteries, and the mesh networking provides high reliability and larger range. The ZigBee Alliance, the standards body that defines ZigBee,[1] also publishes application profiles that allow multiple OEM vendors to create interoperable products. The current list of application profiles either published or in the works are: Home Automation ZigBee Smart Energy 1.0/2.0 Commercial Building Automation Telecommunication Applications Personal, Home, and Hospital Care Toys
The relationship between IEEE 802.15.4 and ZigBee is similar to that between IEEE 802.11 and the Wi-Fi Alliance. The ZigBee 1.0 specification was ratified on 14 December 2004 and is available to members of the ZigBee Alliance. Most recently, the ZigBee 2007 specification was posted on 30 October 2007. The first ZigBee Application Profile, Home Automation, was announced 2 November 2007. As amended by NIST, the Smart Energy Profile 2.0 specification will remove the dependency on IEEE 802.15.4. Device manufactur¬ers will be able to implement any MAC/PHY, such as IEEE 802.15.4(x) and IEEE P1901, under an IP layer based on 6LowPAN.
ZigBee operates in the industrial, scientific and medical (ISM) radio bands; 868 MHz in Europe, 915 MHz in the USA and Australia, and 2.4 GHz in most jurisdictions worldwide. The technology is intended to be simpler and less expensive than other WPANs such as Bluetooth. ZigBee chip vendors typically sell integrated radios and microcontrollers with between 60K and 128K flash memory, such as the Jennic JN5148, the Freescale MC13213, the Ember EM250, the Texas Instruments CC2430, the Samsung Electro-Mechanics ZBS240 and the Atmel ATmega128RFA1. Radios are also available stand-alone to be used with any processor or microcontroller. Generally, the chip vendors also offer the ZigBee software stack, although independent ones are also available. Because ZigBee can activate (go from sleep to active mode) in 15 msec or less, the latency can be very low and devices can be very responsive particularly compared to Bluetooth wake-up delays, which are typically around three seconds. [2] Because ZigBees can sleep most of the time, average power consumption can be very low, resulting in long battery life. The first stack release is now called ZigBee 2004. The second stack release is called ZigBee 2006, and mainly replaces the MSG/KVP structure used in 2004 with a "cluster library". The 2004 stack is now more or less obso-lete.[citation needed] ZigBee 2007, now the current stack release, contains two stack profiles, stack profile 1 (simply called ZigBee), for home and light commercial use, and stack profile 2 (called ZigBee Pro). ZigBee Pro offers more features, such as multi-casting, many-to-one routing and high security with Symmetric-Key Key Exchange (SKKE), while ZigBee (stack profile 1) offers a smaller footprint in RAM and flash. Both offer full mesh networking and work with all ZigBee application profiles.[citation needed] ZigBee 2007 is fully backward compatible with ZigBee 2006 devices: A ZigBee 2007 device may join and operate on a Zig¬Bee 2006 network and vice versa. Due to differences in routing options, ZigBee Pro devices must become non-routing ZigBee End-Devices (ZEDs) on a ZigBee 2006 or ZigBee 2007 network, the same as ZigBee 2006 or ZigBee 2007 devices must become ZEDs on a ZigBee Pro network. The applications running on those devices work the same, regardless of the stack profile beneath them.

1.6 Uses

ZigBee protocols are intended for use in embedded applications requiring low data rates and low power consumption. ZigBee's current focus is to define a general-purpose, inexpensive, self-organizing mesh network that can be used for industrial control, embedded sensing, med¬ical data collection, smoke and intruder warning, building automation, home automation, etc. The resulting network will use very small amounts of power individual devices must have a battery life of at least two years to pass ZigBee certification.
Typical application areas include Home Entertainment and Control Smart lighting, advanced temperature control, safety and security, movies and music
Home Awareness Water sensors, power sensors, energy monitoring, smoke and fire detectors, smart appliances and access sensors
Mobile Services m-payment, m-monitoring and control, m-security and access control, m-healthcare and tele-assist
Commercial Building Energy monitoring, HVAC, lighting, access control
Industrial Plant Process control, asset management, environmental management, energy
management, industrial device control
1.7 Software and hardware

The software is designed to be easy to develop on small, inexpensive microprocessors. The radio design used by ZigBee has been carefully optimized for low cost in large scale produc¬tion. It has few analog stages and uses digital circuits wherever possible. Even though the radios themselves are inexpensive, the ZigBee Qualification Process involves a full validation of the requirements of the physical layer. This amount of concern about the Physical Layer has multiple benefits, since all radios derived from that semiconductor mask set would enjoy the same RF characteristics. On the other hand, an uncertified physical layer that malfunctions could cripple the battery lifespan of other devices on a ZigBee net¬work. Where other protocols can mask poor sensitivity or other esoteric problems in a fade compensation response, ZigBee radios have very tight engineering constraints: they are both power and bandwidth constrained. Thus, radios are tested to the ISO 17025 standard with guidance given by Clause 6 of the 802.15.4-2006 Standard. Most vendors plan to integrate the radio and microcontroller onto a single chip.
Chapter 2
Protocol stack for Zigbee
Zigbee protocol stack mainly consists of PHY and MAC layer from IEEE 802.15.4 stan-dard,Network layer,Application layer.?

2.1 PHYSICAL layer

ZigBee operates in one of three license free bands 2.4 GHz, 915 MHz for North America, and 868 MHz for Europe.At 2.4 GHZ, there are a total of 16 channels available with a maximum data transfer of 250 kbps.At 915 MHz: 10 channels for a max 40 kbps transfer rate.At 868 MHz: 1 channel for a max 20 kbps transfer rate.

2.1.1 Features of PHY layer:

1. Activation and deactivation of the radio transceiver.
2. energy detection -Here the power of received signal is estimated within bandwidth of channel .It is used in network layer for channel selection.
3. Link quality indication (LQI)-This indicator shows the quality of the link between devices within a Zigbee.It is characterization of strength or quality of received packet.
4. Clear channel assessment (CCA)-It is performed to detect if the channel is busy is or empty.A mode in CCA performs the RF energy detection with other wireless network is avoided.
5. Channel selection.

2.2 MAC layer

Mac layer control access to the radio channel.Its responsibilities are transmitting beacon frames,synchroinisation and providing a reliable transmission.

2.2.1 Different mac layer devices
1. Full function device(FFD):

A network device that extends network area coverage, dynamically routes around ob¬stacles ,and provides backup routes in case of network congestion or device.
2. Reduced function device(RFD)

A network device that can start or receive a message but cannot forward messages upstream or downstream.It can communicate with the co-ordinator or a router,but not directely with other end devices.
3. PAN co-ordinator
It is controller of a network that is responsible for the network formation and main-tanance.The PAN co-ordinator must be a router.
4. MAC Layer association
On the power on of end device it sends beacon request.Beacon is a transmission by a Zigbee router to confirm their presence o other network devices.PAN coordinator sends the beacon.Then end device requests for the association.PAN co-ordinator checks wheather enough resourses are present or not if present it sends acknowledgement.and association is established between PAN co-ordinator and end device.

2.3 Network Layer

1. Discovery of route and maintenance.
2. Routing of message
3. Clear channel assessment (CCA)-It is performed to detect if the channel is busy is or empty.A mode in CCA performs the RF energy detection with other wireless network
is avoided. 4. Network management and addressing.
2.3.1 Network layer topologies
Zigbee can work in 3 topologies
1. Mesh topology
2. Cluster tree topology
3. Star topology
2.3.2 Mesh topology in Zigbee
coordinator ro Titer end devices
Figure 2.3: Mesh Topology
Mesh topology,also called peer-to-peer, consists of a mesh of interconnected routers and end. Each router is typically connected through atleast two pathways, and can relay messages for its neighbors.Mesh topology supports "multi-hop"communications, through which data is passed by hopping from device to device using the most reliable communication links and most cost-effective pathuntil its destination is reached.The multi-hop ability also helps to provide fault tolerance, in that if one device fails or experiences interference, the network can reroute itself using the remaining devices.
2.4 Benefits of Mesh topology
1. This topology is highly reliable and robust.Should any individual router become inac¬cessible, alternative routes can be discovered and used.
2. The use of intermediary devices in relaying data means that the range of the network can be significantly increased, making this topology highly scalable.
3. Weak signals and dead zones can be eliminated by simply adding more routers to the network.

2.5 Limitations of Mesh topology

1. This topology has a higher communications overhead than the star topology, which can result in increased latency and lower end-to-end performance.
2. Meshed routing requires more complex network protocols. This means the routers require more embedded resources, which can result in
3. increased power consumption and costs.

2.6 The power of Mesh Topology

Mesh networking was not created specifically for wireless sensor networks. This network topology is already hard at work in both the public switched telephone network (PSTN) and the Internet. The mesh is the best way to achieve the resiliency and scalability demanded from these mission-critical public networks.Examining the key benefits that mesh topologies provide in a bit more detail will help to explain why it is such an appropriate choice for many wireless sensor networks.

2.7 Cluster tree topology in Zigbee

The cluster tree topology is less efficient than the other two, and is therefore rarely (if ever) implemented.

2.8 Star topology in Zigbee

In a Star topology, also called point-to-point, all devices are within direct communication range to the coordinator, through which all messages are routed.A device sends a message to the coordinator, which then passes it on to the destination device. Direct communication

coordinator router
end devices
Figure 2.4: Star Topology between the end devices is not supported.

2.9 Benefits of Star topology

1. Its simplicity means that this topology does not require a complex network layer or routing protocols
2. Performance is generally high, with packets taking a maximum of two hops to reach their destination.

2.10 limitation of Star topology

1. )There are no alternative paths between the device and coordinator, so if a path be¬comes obstructed, communication is lost between the device and coordinator
2. )The radius of the network is limited by the radio range between the coordinator and child devices (typically 30-100 meters).
2.11 Application layer

Application layer mainly consists of Application support sublayer,Application framework and Zigbee device objects
Application Support sublayer-The portion of the Application Layer responsible for pro¬viding a data service to the application and ZigBee device profiles. In addition, it provides a management service to maintain binding links and the storage of the binding table itself.
Application framework-The portion of the Application Layer that provides a description of how to build a profile onto the ZigBee stack so that profiles can be generated in a consistent manner. It also specifies a range of standard data types for profiles, descriptors to assist in service discovery, frame formats for transporting data, and a key value pair construct to rapidly develop simple, attribute based profiles.
Zigbee device objects-The portion of the ZigBee Application Layer responsible for defin¬ing the role of the device within the network (e.g. coordinator, router, or end device), initiating and/or responding to binding and discovery requests, and establishing a secure relationship between network devices. It also provides a rich set of management commands, defined in the ZigBee Device Profile (ZDP).

2.12 Reliable ZigBee Networks

ZigBee is a broad-based standard that is intended to cover a range of applications and competing requirements. Figure 1 shows an example of the range of target markets typically discussed for ZigBee.

2.13 Security in Zigbee

ZigBee security, which is based on a 128-bit AES algorithm, adds to the security model provided by IEEE 802.15.4. ZigBee's security services include methods for key establishment and transport, device management, and frame protection.The ZigBee specification defines security for the MAC, NWK and APS layers. Security for applications is typically provided through Application Profiles.

2.13.1 Trust center

The Trust Center decides whether to allow or disallow new devices into its network.The Trust Center may periodically update and switch to a new Network Key. It first broadcasts the new key encrypted with the old Network Key. Later, it tells all devices to switch to the new key. The Trust Center is usually the network coordinator, but is also able to be a dedicated device. It is responsible for the following security roles:
1. Trust Manager, to authenticate devices that request to join the network
2. Network Manager, to maintain and distribute network keys
3. Configuration Manager, to enable end-to-end security between devices

2.13.2 Security keys

ZigBee uses three types of keys to manage security: Master, Network and Link.

2.13.3 Master keys

These optional keys are not used to encrypt frames. Instead, they are used as an initial shared secret between two devices when they perform the Key Establishment Procedure (SKKE) to generate Link Keys.Keys that originate from the Trust Center are called Trust Center Master Keys, while all other keys are called Application Layer Master Keys.
2.13.4 Network keys

These keys perform security Network Layer security on a ZigBee network. All devices on a ZigBee network share the same key.High Security Network Keys must always be sent en¬crypted over the air, while Standard Security Network Keys can be sent either encrypted or unencrypted. Note that High Security is supported only for ZigBee.

2.13.5 Link keys

These optional keys secure unicast messages between two devices at the Application Layer.Keys that originate from the Trust Center are called Trust Center Link Keys, while all other keys are called Application Layer Link Keys.

2.14 Security modes

ZigBee offers two different security modes: Standard and High.

2.14.1 Standard security mode

In Standard Security mode, the list of devices, master keys, link keys and network keys can be maintained by either the Trust Center or by the devices themselves. The Trust Center is still responsible for maintaining a standard network key and it controls policies of network admittance. In this mode, the memory requirements for the Trust Center are far less than they are for High Security mode.

2.14.2 High security mode

In High Security mode, the Trust Center maintains a list of devices, master keys, link keys and network keys that it needs to control and enforce the policies of network key updates and network admittance. As the number of devices in the network grows, so too does the memory required for the Trust Center.
The additional security capabilities inherent in ZigBee PRO are critical as ZigBee is used in increasingly important applications. The control of critical systems infrastructure, whether in a commercial building, utility grid, industrial plant, or a home security system must not be compromised. ?

2.14.3 Difference between Zigbee and Bluetooth

Bluetooth and ZigBee have much in common. Both are types of IEEE 802.15 wireless personal-area networks," or WPANs. Both run in the 2.4-GHz unlicensed frequency band, and both use small form factors and low .

Chapter 3
Zigbee - Protocol,Devices and Applications
3.1 Protocol

The protocols are built on recent algorithmic research to construct a low-speed ad-hoc net¬work of nodes automatically. In large network instances, the network will be a cluster of clusters in the form of a mesh or a single cluster. ZigBee protocols minimize the time for which the radio is on to reduce the power use. The current profiles derived from the ZigBee protocols support beacon and non-beacon enabled networks.
In beacon enabled networks, the special network nodes called ZigBee Routers transmit periodic beacons to confirm their presence to other network nodes. Beacon Oriented net¬works use Guaranteed Time Slots (GTS). Nodes are active only when a beacon is being transmitted.They may sleep between beacons, that will lower the duty cycle and increase the battery life.The intervals may range from 15.36 milliseconds to

3.2 What ZigBee's "Low Power Consumption" Means

ZigBee's low power consumption is rooted not in RF power, but in a sleep mode specifically designed to accommodate battery powered devices. Any ZigBee-compliant radio can switch automatically to sleep mode when it's not transmitting, and remain asleep until it needs to communicate again. For radios connected to battery-powered devices, this results in ex¬tremely low duty cycles and very low average power consumption.
When a radio is in sleep mode, its RF power rating is irrelevant; it's only when transmit¬ting that its RF power affects power consumption. In the case of Cirronet's ZigBee solutions, a radio with 100 mW RF power will typically consume 150 mA at 3.3 V when transmitting,
compared to 75 mA at 3.3 V for a radio with 1 mW RF power. The 100 mW radio consumes twice as much power - but only when actively transmitting. As long as the high power radio's low noise amplifier is turned off, power consumption while sleeping is roughly equivalent to that of a low power radio.
If the high RF power radio is awake and transmitting 5very active radio, the extra average power consumption is roughly 5power consumption means that a battery that would last for five years with a 1 mW radio would last four years and nine months with a 100 mW radio. As this illustrates, ZigBee radios with higher RF output ratings are still excellent candidates for use with battery powered devices.
It's important to note that the ZigBee Alliance doesn't itself specify anything for RF power. ZigBee's RF power specification comes from IEEE 802.15.4, which specifies a min¬imum power output rating of 1 mW, with no specified maximum. The de facto 100 mW "high power" level relates to the European limit of 100 mW EIRP, including antenna gain.

3.3 Types

There are three different types of ZigBee device:
1. ZigBee coordinator (ZC): The most capable device, the coordinator forms the root of the network tree and might bridge to other networks. There is exactly one ZigBee co¬ordinator in each network. It is able to store information about the network, including acting as the repository for security keys.
2. ZigBee Router (ZR): Routers can act as an intermediate router, passing data from other devices.
3. ZigBee End Device (ZED): Contains just enough functionality to talk to its parent node (either the coordinator or a router); it cannot relay data from other devices.

3.4 Advantages

1. ZigBee's main advantage is its ability to be configured in so-called mesh networks with wireless nodes that are capable of multi-year battery lives.
2. Zigbee Supports large no of nodes in network.
3. Zigbee has Low latency period.It is around 30ms.
4. Power consumption in zigbee is very low as compared to other wireless sensor network technologes hence long battery life.
5. Low cost
6. It Can be used globally since Zigbee alliance is an open global standard source.
7. Zigbee network designs are simple.

3.5 Disadvantages

1. It works over short range.
2. Data rate is low.

3.6 Applications of Zigbee

1. Home Automation-The ZigBee Home Automation profile is likely to be the first ZigBee application profile to hit the marketplace in volume and also holds promise to be the first application space where multiple products from multiple vendors are truly inter¬operable allowing users to mix and match products to enhance their digital lifestyle. Lighting control, thermostats, occupancy and motion sensors, security systems, door and window sensors, as well as fixed and mobile keypads all occupy the ZigBee home automation space and can be bound together to make sophisticated home automation behaviors.
2. Building automation-Wireless sensing and control mesh networks can make building automation easier and more efficient by combining lighting,HVAC, security, safety sys¬tems, and other monitoring networks into a single platform.
3. Industrial plant monitoring-Wireless sensing and control mesh networks provide accu¬rate and efficient IPM, and are also ideal to deploy in hazardous environments in which you want to minimize human exposure.
4. PC and peripherals-PC and peripherals like mouse,keyboard,joystic can be automated.
5. personel health care-Patient monitoring,remote diagnosis are incuded in personel health care applications.
Chapter 4

Conclusion

Comparing ZigBee technology with the other present technology it is evident that ZigBee can have a safe future in this effervescent world of technology.There is definitely a place on the market for ZigBee, since no global standard exists today in the wireless sensor network
area.
ZigBee is the specification of a low-cost, low-power wireless communications solution, meant to be integrated as the main building block of ubiquitous networks. It is maintained by the ZigBee Alliance, which develops the specification and certifies its proper implementation. As of 2007, the latest publicly available revision is the 2006 version.
Bibliography
[I] Eli Yablonovitch, "Inhibited Spontaneous Emission in Solid-State Physics and Electron-
ics," Phys. Rev. Lett., Vol.58, No.20, pp-2059-2062, June 1987.
[2] S.John, "Strong Localization of Photons in Certain Disordered Dielectric Superlattices," Phys. Rev. Lett., Vol.58, No.23, pp-2486-2489, June 1987.
[3] P.Lalanne, "Electromagnetic Analysis of Photonic Crystal Waveguides Operating Above the Light Cone," IEEE J. Quantum Electron, Vol 38, No.7 , pp 800-804, July 2002.
[4] Babak Momeni, Ali Adibi, "An Approximate Effective Index Model for Efficient Analysis and Control of Beam Propagation Effects in Photonic Crystals," Journal of Lightwave
Technology, Vol.23, No.3, pp-1522-1532, March 2005.
[5] J.Jaonnopoulos, R. Meade, J.Winn, Photonic Crystals- Molding the flow of light, (Prince-ton Univ. Press, New Jersey, 1995).
[6] Hatice Altug and Jelena Vuckovic, "Photonic Crystal Nanocavity Arrays," IEEE LEOS Newsletter, pp-4-11, April 2006.
[7] S.Noda, A. Chutinan, M.Imada, "Trapping and emission of photons by a single defect in a photonic bandgap structure," Nature, Vol.407, pp-608-610, October 2000.
[8] , M.Loncar, D. Nedeljkovic, T. Doll, J. Vuckovic, A. Scherer, T.Pearsall,"Waveguiding in planar photonic crystals," Appl.Phys. Lett., Vol.77, No.13, pp-1937-1939, September
2000.
[9] E.Chow, S.Lin, S.Johnson, P.Villeneuve, J.Joannopoulus, J.Wendt, G. Vawter, W.Zubrzycki, H.Hou, A. Alleman, "Three dimensional control of light in a two dimen¬sional photonic crystal slab," Nature, Vol.407, pp-983-986, October 2000.
[10] H.Taniyama, "Waveguiding structures using one-dimensional photonic crystal," Journal
ofApplied Physics, Vol. 91, No.06, pp-3511-3515, March 2002.
[II] J.Soong, Y.Park, H.Jeon, "Optimal Design for One-Dimensional Photonic Crystal
Waveguide," Journal ofLightwave Technology, Vol.22, No.2, pp-509-513, February 2004.
[12] P.Russell, S.Tredwell, P.Roberts, "Full photonic bandgaps and spontaneous emission control in 1D multilayer dielectric structures," Optics Communication, Vol.160, pp-66-71, February 1999.
[13] P. Yeh and A. Yariv,"Bragg reflection waveguides," Opt. Commun., Vol. 19, pp-427-430,
1976.
[14] S. Lin, E. Chow, V. Hietala, P. R. Villeneuve, and J. D. Joannopoulos, "Experimen¬tal demonstration of guiding and bending electromagnetic waves in a photonic crys¬tal," Science, Vol. 282, pp-274-276, 1998.
[15] M. Tokushima, H.Kosaka, A. Tomita, and H.Yamada, "Lightwave propagation through a 120 degrees sharply bent single-line-defect photonic crystal waveguide," Appl. Phys. Lett., Vol. 76, No.8, pp-952-954, 2000.
[16] N. Stefanou and A. Modinos, "Impurity bands in photonic insulators,"Phys. Rev. B ,
Vol. 57, No.19, pp-12 127-12 133, 1998.
[17] I. El-Kady, M.M. Sigalas, R. Biswas, and K. M. Ho, "Dielectric waveguides in two-dimensional photonic bandgap materials,"J. Lightwave Tech., Vol. 17, No.11, pp-2042-
2049, 1999.
[18] G. Tayeb and D. Maystre, "Rigorous theoretical study of finite-size two-dimensional photonic crystals doped by microcavities,"J.Opt.Soc.Am.A, Vol.14, No.12, pp-3323-3332,
1997.
[19] D. Zhou, W. P. Huang, C. L. Xu, D. G. Fang, B. Chen, "The perfectly matched layer boundary condition for scalar finite-difference time domain method, " IEEE Photonics
Lett., Vol.13, No.5, pp-454-456, 2001.
[20] S. Boscolo, C. Conti, M. Midrio and C. G. Someda, "Numerical analysis of propagation and impedance matching in 2-D photonic crystal waveguides with finite length," J. of
Lightwave Tech., Vol. 20, No. 2,pp- 304-310, 2002.
[21] S. Boscolo, C. Conti, M. Midrio,"Y junctions in photonic crystal channel waveguides: high transmission and impedance matching,"Optics Lett., Vol. 27, No. 12, pp-1001-1003,
2002.
[22] http://www.technologyreviewarticles/zigbee
[23] http://www.zigbee.org
[24] http://www.wisegeek.com
[25] http://computing.arizona.edu
[26] http://en.wikipediawiki/ZigBee
[27] http://www.daintree.com


Contents

1 Introduction 1
1.1 What is Zigbee? 1
1.2 Origin of word Zigbee 1
1.3 Zigbee Alliance 2
1.4 Need of Zigbee 2
1.5 Wireless sensor networking is one of the most exciting technology markets today 2
1.6 Uses 4
1.7 Software and hardware 5
2 Protocol stack for Zigbee 6
2.1 PHYSICAL layer 7
2.1.1 Features of PHY layer: 7
2.2 MAC layer 7
2.2.1 Different mac layer devices 7
2.3 Network Layer 8
2.3.1 Network layer topologies 9
2.3.2 Mesh topology in Zigbee 9
2.4 Benefits of Mesh topology 10
2.5 Limitations of Mesh topology 10
2.6 The power of Mesh Topology 10
2.7 Cluster tree topology in Zigbee 10
2.8 Star topology in Zigbee 10
2.9 Benefits of Star topology 11
2.10 limitation of Star topology 11
2.11 Application layer 12
2.12 Reliable ZigBee Networks 12
2.13 Security in Zigbee 12
2.13.1 Trust center 12
2.13.2 Security keys 13
2.13.3 Master keys 13
2.13.4 Network keys 14
2.13.5 Link keys 14
2.14 Security modes 14
2.14.1 Standard security mode 14
2.14.2 High security mode 14
2.14.3 Difference between Zigbee and Bluetooth 14
3 Zigbee - Protocol,Devices and Applications 16
3.1 Protocol 16
3.2 What ZigBee's "Low Power Consumption" Means 16
3.3 Types 17
3.4 Advantages 17
3.5 Disadvantages 18
3.6 Applications of Zigbee 18
4 Conclusion 19
List of Figures
2.1 Zigbee protocol stack 6
2.2 Mac layer association 8
2.3 Mesh Topology 9
2.4 Star Topology 11
2.5 Network 13
List of Tables
2.1 Difference between Bluetooth and Zigbee 15

Please Use Search http://seminarprojects.com/search.php wisely To Get More Information About A Seminar Or Project Topic
09-10-2010, 03:59 PM
Post: #7
RE: Seminar Report On ZigBee: Next Generation Wireless Network
For more information about this article,please follow the link:
http://www.seminarprojectsThread-wireless-intelligent-networking-full-report
12-10-2010, 12:38 PM
Post: #8
Tongue RE: Seminar Report On ZigBee: Next Generation Wireless Network
Maintaining Performance while Saving Energy on Wireless LANs
+


Ronny Krashinsky


Motivation
.


Mobile devices limited by battery weight and lifetime
Wireless network access consumes a lot of energy
Want to disable the network interface card whenever its not in use
Basic problem: data may arrive from the network at any time
Focus of this work: a mobile client communicating with a wired base-station to perform request/response traffic (e.g. web browsing)
Not focusing on: ad hoc networks, mobile servers, real-time communication (voice)
Not relying on high-level knowledge of application state

802.11 Power-Saving Mode Overview (For Infrastructure Networks)


Network Interface Card power consumption:
Cisco Aironet: 1.7W Tx, 1.2W Rx, 1.1W Idle, 50mW Sleep
Basic idea: sleep to save energy, periodically wakeup to check for pending data
Clients go to sleep after sending or receiving data
Base-station buffers received data while client is asleep
Base-station sends out beacons every 100ms indicating whether or not the Client has pending data
Client wakes up to listen to beacon, then polls Base-station to receive data (ListenInterval can be less than BeaconPeriod)
Client can wake up to send data at any time
Talk Outline
Measured performance of TCP over 802.11 PSM (it’s not good)
Trace analysis for characteristics of client HTTP traffic (how to save energy)
Proposed enhancements to 802.11 PSM to improve performance and minimize energy
Simulation of web browsing traffic over existing 802.11 PSM and alternatives

For more information about this article,please follow the link:
http://www.googleurl?sa=t&source=web&cd=...slides.ppt&ei=mAi0TIYVxIM60KLgqgo&usg=AFQjCNErOPWV33TtjAyvhtXWsyw7luOpcg
13-10-2010, 11:28 AM
Post: #9
RE: Seminar Report On ZigBee: Next Generation Wireless Network

.docx  ABSTRAC123.docx (Size: 18.36 KB / Downloads: 95)

Dragging the world towards wireless galaxy

ABSTRACT



"Dragging the world towards wireless galaxy"
Various sensors are already in a broad use today as part of different devices or as standalone devices connected to a network usually to monitor industrial processes, equipments or installations.
The advancements in technology, wireless communications have enhanced development of small, low power and low cost devices. Such devices when organized into a network, present a powerful platform that can be used in many interesting applications.
Bluetooth is a low cost, short-range, wireless technology with small footprint, low power consumption and reasonable throughput. Bluetooth wireless technology has become global technology specification for "always on" wireless communication not just as a point-to-point but was a network technology as well.
The kernel of this paper, deals about an implementation of bluetooth based sensor networks.


Introduction
The communications capability of devices and continuous transparent information routes are indispensable components of future oriented automation concepts. Communication is increasing rapidly in industrial environment even at field level.
In any industry the process can be realized through sensors and can be controlled through actuators. The process is monitored on the central control room by getting signals through a pair of wires from each field device in Distributed Control Systems (DCS). With advent in networking concept, the cost of wiring is saved by networking the field devices. But the latest trend is elimination of wires i.e., wireless networks.
Wireless sensor networks - networks of small devices equipped with sensors, microprocessor and wireless communication interfaces.
In 1994, Ericsson Mobile communications, the global telecommunication company based in Sweden, initiated a study to investigate, the feasibility of a low power, low cost ratio interface, and to find a way to eliminate cables between devices. Finally, the engineers at the Ericsson named the new wireless technology as "Blue tooth" to honour the 10th century king if Denmark, Harald Blue tooth (940 to 985 A.D).
The goals of blue tooth are unification and harmony as well, specifically enabling different devices to communicate through a commonly accepted standard for wire less connectivity.




Blue Tooth
Blue tooth operates in the unlicensed ISM band at 2.4 GHZ frequency band and use frequency hopping spread spectrum technique. A typical Blue tooth device has a range of about 10 meters and can be extended to 100meters. Communication channels supports total bandwidth of 1 Mb / sec. A single connection supports a maximum asymmetric data transfer rate of 721 KBPS
28-01-2011, 03:36 PM
Post: #10
RE: Seminar Report On ZigBee: Next Generation Wireless Network



.ppt  zigbeeimpppt.ppt (Size: 1.67 MB / Downloads: 179)

Contents
1. The ZigBee Alliance and 802.15.4
2. Features of Protocol Stack
3. ZigBee and Bluetooth
4. Reliability Throughout the Stacks
5. Robustness Throughout the Stacks
6. 802.15.4/ZigBee vs. Bluetooth
7. Motorola 802.15.4/ZigBee™ Platform
8. An Application Example

The ZigBee Alliance and 802.15.4
1. The ZigBee Alliance is
A consortium of end users and solution providers, primarily responsible forthe development of the 802.15.4 standard
Developing applications and network capability utilizing the 802.15.4 packet delivery mechanism
Addresses application and interoperability needs of a substantial part of the market
2. IEEE 802.15.4
Composed of many of the individuals and companies that make up theZigBee Alliance
Developed the basic PHY and MAC standard with the requirement that 15.4be simple and manageable and that high‐level functionality (networking,security key management, applications) be considered

ZigBee (1/2)
1. ZigBee is designed to be a low power, low cost, low data rate, wirelesssolution.
2. ZigBee relies upon the robust IEEE 802.15.4 PHY/MAC to providereliable data transfer in noisy, interference‐rich environments
3. ZigBee layers on top of 15.4 with Mesh Networking, Security, andApplications control

ZigBee (2/2)
1. ZigBee Value Propositions
Addresses the unique needs of most remote monitoring and control network applications
1) Infrequent, low rate and small packet data
Enables the broad‐based deployment of wireless networks with low cost & low power solutions
1) Example: Lighting, security, HVAC,
2) Supports peer‐to‐peer, star and mesh networks
Monitor and sensor applications that need to have a battery life of years on alkaline batteries
1) Example – security systems, smoke alarms

What is the ZigBee Alliance?
1. Organization defining global standards for reliable, cost‐effective, low power wireless applications
2. A rapidly growing, worldwide, non‐profit industry consortium of
Leading semiconductor manufacturers
Technology providers
OEMs
End‐users
3. Sensors are one of the reasons for ZigBee!

What is ZigBee technology?
1. Cost‐effective, standards‐based wireless networking solution
2. Developed for and targets applications that need
low to moderate data rates and low duty cycles
Low average power consumption / long battery life
Security and reliability
Flexible and dynamic network topologies
1) Star, cluster tree and mesh networks
Interoperable application frameworks controlled by anindustry alliance toensureinteroperability/compatibility

The ZigBee Alliance Solution
1. Targeted at
Industrial and Commercial control/monitoring systems
Wireless sensor systems
Home and Building automation and controls
Medical monitoring
Consumer electronics
PC peripherals
2. Industry standard through application profiles running over IEEE 802.15.4 radios
3. Primary drivers
Simplicity
Long battery life
Networking capabilities
Reliability
Low cost
4. Alliance member companies provide interoperability and certificationtesting

Why do we need ZigBee technology?
1. ONLY standards‐based technology that
Addresses the unique needs of most remote monitoring and control andsensory network applications
Enables the broad‐based deployment of wireless networks with low cost, low power solutions
Provides the ability to run for years on inexpensive primary batteries for a typical monitoring application

Architecture Objectives
ZigBee Architecture Objectives
1. Enables cost‐effective, low power, reliable devices for monitoring andcontrol
2. ZigBee’s architecture developed to target environments and applicationsbest suited to the technology
3. Provide a platform and implementation for wirelessly networked devices
4. Ensure interoperability through the definition of application profiles
5. Define the ZigBee network and stack models
6. Provide the framework to allow a separation of concerns for the specification, design, and implementation of ZigBee devices
7. Allow future extension of ZigBee

How A ZigBee Network Forms
1. Devices are pre‐programmed for their network function
Coordinator scans to find an unused channel to start a network
Router (mesh device within a network) scans to find an active channel to join,then permits other devices to join
End Device will always try to join an existing network
2. Devices discover other devices in the network providing complementary services
Service Discovery can be initiated from any device within the network
3. Devices can be bound to other devices offering complementary services
Binding provides a command and control feature for specially identified setsof devices



20-02-2011, 04:04 PM
Post: #11
RE: Seminar Report On ZigBee: Next Generation Wireless Network
hi check it out..its da seminar topic..nd all bot zigbee technology..
16-07-2011, 04:00 PM
Post: #12
RE: Seminar Report On ZigBee: Next Generation Wireless Network

.pptx  ZIGBEE prsnt.pptx (Size: 2.56 MB / Downloads: 99)
ZIGBEE
Wat is Zigbee?

Characteristics
ZigBee-based wireless devices operate in 868 MHz,915 MHz, and 2.4 GHz frequency bands.
The maximum data rate is 250 K bits per second.
What Does ZigBee Do?
Designed for wireless controls and sensors
Operates in Personal Area Networks (PAN’s) and device-to-device networks
Connectivity between small packet devices
Control of lights, switches, thermostats, appliances, etc.
IEEE 802.15.4 Device Types
Three device types
Network Coordinator
• Maintains overall network knowledge; most sophisticated of the three types; most memory and computing power
Full Function Device
• Carries full 802.15.4 functionality and all features specified by the standard
• Additional memory, computing power make it ideal for a network router function
• Could also be used in network edge devices (where the network touches the real world)
Reduced Function Device
• Carriers limited (as specified by the standard) functionality to control cost and complexity
• General usage will be in network edge devices
• All of these devices can be no more complicated than the transceiver, a simple 8-bit MCU and a pair of AAA batteries!
Comparison
Power Consumption
Complexity
Cost
Topologies
Star Topology
Peer to peer topology
Mesh Topology
Mesh networks
Coordinators
A coordinator, which organizes the
network and maintains routing tables.
■ Routers, which can talk to the coordinator, to other routers and to reduced-function end devices.
End devices
Reduced-function end devices, which
can talk to routers and the coordinator, but
not to each other.
A mesh network
Advantages
Reliable
Supports large number of nodes
Easy to deploy
Very long battery life
Secure
Low cost
Can be used globally
Home automation
28-07-2011, 10:04 AM
Post: #13
RE: Seminar Report On ZigBee: Next Generation Wireless Network
please send me this report
28-07-2011, 01:05 PM
Post: #14
RE: Seminar Report On ZigBee: Next Generation Wireless Network
Hi,

I would like to have more information about ZIG-BEE.

Thanks for the information given.

Regards,
Sadia.
04-02-2012, 10:37 AM
Post: #15
RE: Seminar Report On ZigBee: Next Generation Wireless Network
to get information about the topic zigbee full report ,ppt and related topic refer the link bellow

http://www.seminarprojectsThread-zigbee-project-ideas-or-titles

http://www.seminarprojectsThread-zigbee-based-projects

http://www.seminarprojectsThread-seminar-report-on-zigbee-next-generation-wireless-network?page=2

http://www.seminarprojectsThread-wireless-communication-%E2%80%93-zigbee-bluetooth-rf-ir-based-major-projects-for-ece

http://www.seminarprojectsThread-zigbee-projects-report-or-ideas-for-final-year-students

http://www.seminarprojectsThread-zigbee-home-automation-the-new-global-standard-for-home-automation

http://www.seminarprojectsThread-zigbee-based-project

http://www.seminarprojectsThread-zigbee-a-new-generation-technology

http://www.seminarprojectsThread-zigbee-based-extinguisher
25-05-2012, 12:09 PM
Post: #16
RE: Seminar Report On ZigBee: Next Generation Wireless Network
ZigBee


.ppt  ZIGBEE PROTOCOL IMPLEMENTATION.ppt (Size: 578.5 KB / Downloads: 29)


ZIGBEE INTRODUCTION



A specification from the ZigBee for a set of high-level communications protocols based on the IEEE 802.15.4 standard for a low-data-rate wireless personal area network (WPAN) comprising devices of low complexity and long battery life. ZigBee is designed for connecting devices in ad hoc networks over very short distances with very low power consumption


Z operates in (ISM) radio bands using (DSSS) transmission.;
868 MHz in Europe, 915 MHz in Australia, and 2.4 GHz in most jurisdictions worldwide.


Device types:


There are three different type the

:ZigBee coordinator (ZC): coordinator forms the root s of ZigBee devices

ZigBee Router (ZR): act as an intermediate router, passing data from other devices.

ZigBee End Device (ZED): Contains just enough functionality to talk to the parent node

Function Devices:

a full-function device (FFD) and a reduced-function device (RFD).

The FFD can operate in three modes serving as a PAN coordinator, a coordinator, or a device

An RFD is intended for applications that are extremely simple

a 64-bit IEEE address or a 16-bit short address assigned during the association procedure


Protocols


The current profiles derived from the ZigBee protocols support beacon and non-beacon enabled networks.

. Beacon and Superframe Structure



MODES OF OPERATION:


Transparent Operation:
Serial-to-RF Packetization: When operating in this mode, the modules act as a serial line replacement - all UART data received


API Operation: API (Application Programming Interface) Operation is an alternative to the default Transparent Operation.
21-12-2012, 11:57 AM
Post: #17
RE: Seminar Report On ZigBee: Next Generation Wireless Network
to get information about the topic "advantages of zigbee over gsm network" full report ppt and related topic refer the link bellow

http://seminarprojectsThread-patient-monitoring-using-gsm-and-zigbee-for-hospitals-and-old-age-homes

http://seminarprojectsattachment.php?aid=43667

http://seminarprojectsThread-seminar-report-on-zigbee-next-generation-wireless-network

http://seminarprojectst-zigbee-and-gsm-sms-based-conductor-temperature-and-sag-monitoring

http://seminarprojectst-low-cost-zigbee-and-gsm-sms-based-conductor-temperature-and-sag-monitoring-system
Rating Seminar Report On ZigBee: Next Generation Wireless Network Options
Share Seminar Report On ZigBee: Next Generation Wireless Network To Your Friends :- Seminar Topics Bookmark
Post Reply 

Marked Categories : seminar on zigbee, wireless zigbee, network topology seminar report, seminar, seminar report on wireless networking, zigbee for report, zigbee seminar reports, zigbee report, seminar report on zigbee, 3g wireless network for higher education with ppt, zigbee wireless vehicular identification and authentication system ppt, zigbee protocol 2012 ppts, zigbee seminar report download, hard copy of zigbee, abstract for zigbee ppt, zigbee sep 2 0 network nodes, zigbee technology seminar report, zigbee, seminar reports on zigbee technology, list out hot ieee topics in the market for computer science for technical seminar 2012, zig bee, zig bee protocol, seminor on zigbee,

[-]
Quick Reply
Message
Type your reply to this message here.


Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Seminar report on Android mkaasees 0 0 09-11-2016 04:31 PM
Last Post: mkaasees
  A Seminar On Cloud Computing mkaasees 0 0 07-11-2016 04:16 PM
Last Post: mkaasees
  SEMINAR ON OSI MODEL mkaasees 0 0 03-11-2016 10:34 AM
Last Post: mkaasees
  Seminar Report On QR Code mkaasees 0 0 27-10-2016 09:54 AM
Last Post: mkaasees
  A SEMINAR ON ATM SECURITY mkaasees 0 0 26-10-2016 11:49 AM
Last Post: mkaasees
  Cellonics Seminar Report mkaasees 0 0 25-10-2016 11:15 AM
Last Post: mkaasees
  Mobile Ad Hoc Network mkaasees 0 0 17-10-2016 11:47 AM
Last Post: mkaasees
  Seminar On Steganography mkaasees 0 0 14-10-2016 03:56 PM
Last Post: mkaasees
  mobile computing full report seminar topics 28 35,597 14-10-2016 02:33 PM
Last Post: jaseela123
  Seminar On DNS mkaasees 0 0 07-10-2016 03:13 PM
Last Post: mkaasees
This Page May Contain What is Seminar Report On ZigBee: Next Generation Wireless Network And Latest Information/News About Seminar Report On ZigBee: Next Generation Wireless Network,If Not ...Use Search to get more info about Seminar Report On ZigBee: Next Generation Wireless Network Or Ask Here

Options: