Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Tags: project seismic, sensor,
Ask More Info Of  A Seminar Ask More Info Of A Project Post Reply  Follow us on Twitter
07-07-2010, 06:53 PM
Post: #1
project-seismic sensor

plz give some introduction to seismic sensor.....
18-09-2010, 04:39 PM
Post: #2
RE: project-seismic sensor
More Info About project-seismic sensor

This circuit simulates a seismic sensor to detect vibrations/sounds. It is very sensitive and can detect vibrations caused by the movement of animals or human beings.So it can be used to monitor protected areas to restrict entry of unwanted persons or animals.The circuit uses readily available components and the design is straight forward.A standard piezo sensor is used to detect vibrations/sounds due to pressure changes.

The piezo element acts as a small capacitor having a capacitance of a few nano farads. Like a capacitor, it can store charge when a potential is applied to its terminals. It discharges through VR1, when it is disturbed.

In the circuit, IC TLO71 (IC1) is wired as a differential amplifier with both its inverting and non-inverting inputs tied to the negative rail through a resistive network comprising R1, R2 and R3. Under idle conditions (as adjusted by VR1), both the inputs receive almost equal voltages, which keeps the output low.TLO71 is a low-noise JFET input op-amp with low input bias and offset current. The BIFET technology provides fast slew rates. Capacitor C1 is provided in the circuit to keep the differential input of IC1 for better performance.When the piezo element is disturbed(by even a slight movement), it discharges the stored charge. This alters the voltage level at the inputs of IC1 and the output momentarily swings high as indicated by green LED1. This high output is used to trigger switching transistor T1, which triggers monostable IC2. The timing periodof IC2 is determined by R7 andC5. With the shown values, it will be around two minutes. The high output from IC2 activates T2 and the buzze rstarts beeping along with red light indication from LED2.

Assemble the circuit on a common PCB and enclose in a suitable cabinet.Connect the piezo element to the PCB using single-core shielded wire. Enclose the piezo element inside a rustproof,small aluminium box. The piezo element should be firmly glued to theen closure facing the fine side towards the case. Fix the sensor assembly on the back side of a ceramic tile or granite tile with good adhesive. Fix the tile(or bury it in the earth) near the entrance with the sensor assembly facing downwards. Whenever a pressure change develops near the sensor, the circuit will be activated.

reference by http://engg-project2.blogspot2010/07/sei...ensor.html
30-04-2011, 12:47 PM
Post: #3
RE: project-seismic sensor
project report on seismic sensor
02-05-2011, 04:38 PM
Post: #4
RE: project-seismic sensor
Measuring seismic activity is very essential for predicting earthquakes. Many such measuring devices are placed at various places of the world. But for a better prediction covering an entire area is very important. A collection of zigbee sensor networks can help to do this. Many zigbee enabled seismic sensors can be deployed at various places especially city under grounds to monitor seismic patterns.

The data collected by each sensor will hop through the zigbee network to reach a wifi station from where it will be transmitted to a server. Several such networks deployed across the world sending seismic activity to a central server can be set up. All this data on the server with proper analysis can help in predicting changes in seismic activity and may be and earthquake.
Rating project-seismic sensor Options
Share project-seismic sensor To Your Friends :- Seminar Topics Bookmark
Post Reply 

Marked Categories : piezo seismic sensor, introduction for seismic detector, introduction to seismic sensor, earthquake sensor project, seismic detector ppt, introduction to seismic sensors, ppt of seismic sensor, paper presentation on seismic sensor, seismic sensors basics, project on seismic sensor, report on seismic sensors, use of tlo71 in seismic sensor explained in ppt, seismic sensor, earthquake detector informer complite project report, seismic sensor project report, seismic sensors pdf, seismic sensor ppt, how to use peizo element in seismic sensor, sensmic sensor with information, seismic sensor project, project of seimic sensor, prroject report of sismic sensor,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Sad chat server project report in advance java with snap shots tyagi rocks 11 7,890 04-01-2017 01:11 PM
Last Post: Guest
  PROJECT Guest 1 0 29-10-2016 09:48 AM
Last Post: jaseela123
  flood monitoring project Guest 1 0 19-09-2016 11:39 AM
Last Post: anusree
  universal current sensor Guest 3 254 20-07-2016 11:28 AM
Last Post: visalakshik
Big Grin project file for physics Guest 3 393 19-07-2016 02:03 PM
Last Post: jaseela123
  Perisltic pump project Proceed rathod 1 239 25-04-2016 12:53 PM
Last Post: mkaasees
  project report on hydraulic vice Guest 2 1,407 20-04-2016 10:41 AM
Last Post: mkaasees
Bug can i get website tracking system project please prasad botre 1 230 09-04-2016 02:58 PM
Last Post: dhanabhagya
  project soli azeem cheema 2 257 07-04-2016 02:39 PM
Last Post: dhanabhagya
  help to interface gas sensor with microcontroller sameer gunjal 2 2,060 05-04-2016 09:41 AM
Last Post: mkaasees
This Page May Contain What is project-seismic sensor And Latest Information/News About project-seismic sensor,If Not ...Use Search to get more info about project-seismic sensor Or Ask Here