PPT , V.Abhinav.pptx (Size: 2.84 MB / Downloads: 1766)
Plastic use in road construction is not new. Recent studies in this direction have shown some hope in terms of using plastic-waste in road construction i.e., Plastic roads. Plastic roads mainly use plastic carry-bags, disposable cups and PET bottles that are collected from garbage dumps as an important ingredient of the construction material. When mixed with hot bitumen, plastics melt to form an oily coat over the aggregate and the mixture is laid on the road surface like a normal tar road.
PALSTIC ROADS IN BANGALORE
What is Plastic??
A plastic material is any of a wide range of synthetic
or semi-synthetic organic amorphous solids
used in the manufacture of industrial products.
Plastics are typically polymers of high molecular mass
and may contain other substances to improve perfo-
-rmance and/or reduce costs. Monomers of plastic are
either natural or synthetic organic compounds.
Strewn across fields, they block germination and prevent rainwater absorption by soil. Recycling plastic by melting releases fumes, and is only possible 3-4 times. Toxic contents might leach into recycled water pots or water-pipes. Shredded plastic is a great additive for tar roads.
PLASTIC WASTE, HAZARDOUS TO EARTH
2. Cleaning process.
3. Shredding process.
4. Collection process.
plastic waste collected from various sources must be separated from other wasteMaximum thickness of 60 microns SEGREGATION PROCESS
2. CLEANING PROCESS
Plastic waste get cleaned and dried. cleaning process
3. SHREDDING PROCESS
will be shredded or cut into small piece.
the different types of plastic wastes are mixed together shredding process
4. COLLECTION PROCESS
the plastic waste retaining in 2.36 mm is collected.
There are two type of field trials
1. DRY PROCESS
The aggregate is heated to 170°C in the Mini hot Mix Plant .
The shredded plastic waste is added in equal proportion.
Adding shredded plastic
Waste plastics by direct mixing
with hot bitumen at 160°C
Mechanical stirrer is needed
Addition of stabilizers and proper cooling.
Since the wet process require a lot of investment and bigger plants
Not commonly used..
ADVANTAGES OF PLASTIC ROAD
Use higher percentage of plastic waste.
Reduce the need of bitumen by around 10%.
Increase the strength and performance of the road.
Reduce the cost to around Rs. 5000/Km. of single lane road.
Generate jobs for rag pickers.
Develop a technology, which is eco-friendly.
100% improvement in fatigue life of roads.
Reduced penetration and ductility, a higher softening point, less rutting and cold cracking.
DISADVANTAGES OF PLASTIC ROADS
1. Cleaning process
Toxics present in the co-mingled plastic waste would start leaching.
2. During the road laying process
In the presence of chlorine will definitely release noxious HCL gas.
3.After the road laying
It is opined that the first rain will trigger leaching. As the plastics will merely form a sticky layer, (mechanical abrasion).
The components of the road, once it has been laid, are not inert.
Plastic will increase the melting point of the bitumen
use of the innovative technology not only strengthened the road construction but also increased the road life
Help to improve the environment .
plastic road would be a boon for India’s hot and extremely humid climate where durable and eco-friendly roads which will relive the earth from all type of plastic waste
a simple way to make echo friendly constructions.