RE: Natural Disasters ppt
disasters.ppt (Size: 1.65 MB / Downloads: 187)
In strict meteorological terminology, an
area of low atmospheric pressure surrounded
by a wind system blowing, in the
northern hemisphere, in a counterclockwise direction.
A corresponding high-pressure area with clockwise winds is known as an anticyclone. In the southern hemisphere these wind directions are reversed. Cyclones are commonly called lows and anticyclones highs. The term cyclone has often been more loosely applied to a storm and disturbance attending such pressure systems, particularly the violent tropical hurricane and the typhoon, which center on areas of unusually low pressure.
Hurricane, name applied to migratory tropical cyclones that originate over oceans in certain regions near the equator, and particularly to those arising in the West Indian region, including the Caribbean Sea and the Gulf of Mexico.
Hurricane-type cyclones in the western Pacific are known as typhoons.
Tornado-violently rotating column of air extending from within a thundercloud down to ground level. The strongest tornadoes may sweep houses from their foundations, destroy brick buildings, toss cars and school buses through the air, and even lift railroad cars from their tracks. Tornadoes vary in diameter from tens of meters to nearly 2 km (1 mi), with an average diameter of about 50 m (160 ft). Most tornadoes in the northern hemisphere create winds that blow counterclockwise around a center of extremely low atmospheric pressure. In the southern hemisphere the winds generally blow clockwise. Peak wind speeds can range from near 120 km/h (75 mph) to almost 500 km/h (300 mph). The forward motion of a tornado can range from a near standstill to almost 110 km/h (70 mph).
When it rains or snows, some of the water is retained by the soil, some is absorbed by vegetation, some evaporates, and the remainder, which reaches stream channels, is called runoff.
Floods occur when soil and vegetation cannot absorb all the water; water then runs off the land in quantities that cannot be carried in stream channels or retained in natural ponds and constructed reservoirs.
CONTROL OF FLOODS
The basic methods of flood control have been practiced since ancient times. These methods include reforestation and the construction of levees, dams, reservoirs, and floodways (artificial channels that divert floodwater).
Although dams have been used for many centuries, their primary purposes were to build up water reservoirs for irrigation and other domestic uses and to create power
An effective method of controlling floodwaters is to construct coordinated groups of dams and reservoirs on the headwaters of the streams that lead into the main rivers, so that water can be stored during periods of heavy runoff and released gradually during dry seasons (see Water Supply and Waterworks).
The sudden movement of rocks along a fault causes vibrations that transmit energy through the Earth in the form of waves.
Waves that travel in the rocks below the surface of the Earth are called body waves, and there are two types of body waves: primary, or P, waves, and secondary, or S, waves.
The S waves, also known as shearing waves, move the ground.
Earthquakes cannot be prevented, but the damage they cause can be greatly reduced with communication strategies, proper structural design, emergency preparedness planning, education, and safer building standards.
Engineers minimize earthquake damage to buildings by using flexible, reinforced materials that can withstand shaking in buildings
Since the 1960s, scientists and engineers have greatly improved earthquake-resistant designs for buildings that are compatible with modern architecture and building materials.
In urban areas of the world, the seismic risk is greater in non-reinforced buildings made of brick, stone, or concrete blocks because they cannot resist the horizontal forces produced by large seismic waves.
Fortunately, single-family timber-frame homes built under modern construction codes resist strong earthquake shaking very well.
Such houses have laterally braced frames bolted to their foundations to prevent separation.
Although they may suffer some damage, they are unlikely to collapse because the strength of the strongly jointed timber-frame can easily support the light loads of the roof and the upper stories even in the event of strong vertical and horizontal ground motions.