Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Ask More Info Of  A Seminar Ask More Info Of A Project Post Reply  Follow us on Twitter
09-03-2012, 03:17 PM
Post: #1
Lecture 36 Concrete Design

Lecture 36 – Concrete Design – Continuous Beams & Slabs, Columns Continuous Beams and Slabs

.pdf  AECT210-Lecture 36.pdf (Size: 233.89 KB / Downloads: 196)
Concrete structural members are typically poured integrally together.
Beams and slabs often span multiple supports and are not “simplysupported”
as steel and wood framed beams are. As discussed in Lecture
15, these concrete beams and slabs are continuous and have both
positive moments and negative moments.
The location of tension bars in the members is related to the location of

Rebar Placement:
At the transition between the Mpos and Mneg zones, a minimum overlap of
bars is required per ACI 318. These overlaps are required for developing
the full bar strength in tension. The friction developed between the
concrete and the ribs of the rebar must equal the tensile strength of the
bar. The necessary length of the bar embedment to achieve this friction
force is called the “Development Length”, Ld, and is specified as a
multiple of bar diameters. For example, the Ld for a Grade 60 rebar and
concrete f’c = 4000 PSI = 38 x bar diameter.

Concrete Columns:
As discussed in the previous lecture, concrete is good at resisting
compression but poor in resisting tension. So, it might make sense that
concrete would be the material of choice for columns. It is true that
concrete IS used for compression members such as columns, piers,
bearing walls and pedestals. Members under pure compression could
then (theoretically) be unreinforced. These members are often subject to
additional forces such as moment that would put some tensile forces into
the member and would thus necessitate the addition of tension

Spiral Column:
A spiral column has a single rebar wrapped around the vertical bars in a
spiral and is stronger than a comparable tied column. It is more laborintensive
to build than a tied column. The ACI requires a minimum of 6
vertical bars, with the same minimum and maximum areas as a tied

Column Load Capacity:
Columns are rarely under pure axial compression only. Typically they
experience moment in conjunction with axial loads and are under
combined compressive and bending stresses. For this reason, the
numeric calculations involved with determining the combined axial
capacity and bending capacity are daunting.
Rating Lecture 36 Concrete Design Options
Share Lecture 36 Concrete Design To Your Friends :- Seminar Topics Bookmark
Post Reply 

Marked Categories : concrete lecture, concrete design, aect210 lecture 24 pdf,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Pavement Design mkaasees 0 0 27-10-2016 02:48 PM
Last Post: mkaasees
  DESIGN AND DETAILINGOF FLAT SLAB pdf study tips 2 1,488 27-10-2016 10:01 AM
Last Post: jaseela123
  Corrosion Of Reinforcement In HVFA Concrete computer science crazy 5 376,902 21-10-2016 09:24 AM
Last Post: Guest
  MANUAL ANALYSIS AND DESIGN OF G+3 BUILDING mkaasees 0 0 31-08-2016 10:20 AM
Last Post: mkaasees
  Fiber Reinforced Concrete full report smart paper boy 5 11,851 18-07-2016 10:41 AM
Last Post: jaseela123
  SEISMIC RETROFITTING OF CONCRETE BUILDINGS full report project report tiger 20 18,169 30-06-2016 01:14 PM
Last Post: dhanabhagya
  CELLULAR LIGHT WEIGHT CONCRETE ppt project girl 8 8,735 15-04-2016 10:27 AM
Last Post: mkaasees
  SLURRY INFILTRATED FIBER CONCRETE seminar paper 1 2,083 11-03-2016 08:16 AM
Last Post: Guest
  GALAXY CONCRETE TRANSLUCENT WALL seminar projects maker 1 1,358 21-02-2016 09:07 PM
Last Post: Guest
  green concrete full report project topics 14 45,305 08-10-2015 12:19 PM
Last Post: mkaasees
This Page May Contain What is Lecture 36 Concrete Design And Latest Information/News About Lecture 36 Concrete Design ,If Not ...Use Search to get more info about Lecture 36 Concrete Design Or Ask Here