Important: Use custom search function to get better results from our thousands of pages

Use " " for compulsory search eg:"electronics seminar" , use -" " for filter something eg: "electronics seminar" -"/tag/" (used for exclude results from tag pages)

Ask More Info Of  A Seminar Ask More Info Of A Project Post Reply  Follow us on Twitter
05-03-2011, 12:02 PM
Post: #1
Rainbow construction of cupola furnace detail

Hi I am kishor virani Studing in diploma Engg. in metallurgy in Gandhy college at surat. I was select a project ' MODEL OF CUPOLA FURNACE '. So its related any topic with images or without any kind of information of construction of model of cupola furnace any kind of form like word file, ppt file etc.,[/size][/font]
14-09-2012, 03:45 PM
Post: #2
RE: construction of cupola furnace detail
Cupola furnace

.docx  Cupola furnace.docx (Size: 174.51 KB / Downloads: 55)

A cupola or cupola furnace is a melting device used in foundries that can be used to melt cast iron, ni-resist iron and some bronzes. The cupola can be made almost any practical size. The size of a cupola is expressed in diameters and can range from 1.5 to 13 feet (0.5 to 4.0 m).[1] The overall shape is cylindrical and the equipment is arranged vertically, usually supported by four legs. The overall look is similar to a large smokestack.
The bottom of the cylinder is fitted with doors which swing down and out to 'drop bottom'. The top where gases escape can be open or fitted with a cap to prevent rain from entering the cupola. To control emissions a cupola may be fitted with a cap that is designed to pull the gases into a device to cool the gases and remove particulate matter.
The shell of the cupola, being usually made of steel, has refractory brick and refractory patching material lining it. The bottom is lined in a similar manner but often a clay and sand mixture ("bod") may be used, as this lining is temporary.Finely divided coal ("sea coal") can be mixed with the clay lining so when heated the coal decomposes and the bod becomes slightly friable, easing the opening up of the tap holes.[2] The bottom lining is compressed or 'rammed' against the bottom doors. Some cupolas are fitted with cooling jackets to keep the sides cool and with oxygen injection to make the coke fire burn hotter.


To begin a production run, called a 'cupola campaign', the furnace is filled with layers of coke and ignited with torches. Some smaller cupolas may be ignited with wood to start the coke burning. When the coke is ignited, air is introduced to the coke bed through ports in the sides called tuyeres.
When the coke is very hot, solid pieces of metal are charged into the furnace through an opening in the top. The metal is alternated with additional layers of fresh coke. Limestone is added to act as a flux. As the heat rises within the stack the metal is melted. It drips down through the coke bed to collect in a pool at the bottom, just above the bottom doors. During the melting process athermodynamic reaction takes place between the fuel and the blast air. The carbon in the coke combines with the oxygen in the air to form carbon monoxide. The carbon monoxide further burns to form carbon dioxide. Some of the carbon is picked up by the falling droplets of molten metal which raises the carbon content of the iron. Silicon carbide and ferromanganese briquettes may also be added to the charge materials. The silicon carbide dissociates and carbon and silicon enters into the molten metal. Likewise, the ferromanganese melts and is combined into the pool of liquid iron in the 'well' at the bottom of the cupola. Additions to the molten iron such as ferromanganese, ferrosilicon, Silicon carbide and other alloying agents are used to alter the molten iron to conform to the needs of the castings at hand.

Quality control

During the production, samples may be taken from the metal and poured into small molds. A chill wedge is often poured to monitor the iron quality. These small, approx 18 mm (3/4") wide x 38 mm (1-12") tall triangular shaped pieces are allowed to cool until the metal has solidified. They are then extracted from the sand mold and quenched in water, wide end first. After cooling in the manned the wedges are fractured and the metal coloration is assessed. A typical fracture will have a whitish color towards the thin area of the wedge and grayishcolor towards the wide end. The width of the wedge at the point of demarcation between the white and gray areas is measured and compared to normal results for particular iron tensile strengths. This visual method serves as a control measurement.
Rating construction of cupola furnace detail Options
Share construction of cupola furnace detail To Your Friends :- Seminar Topics Bookmark
Post Reply 

Marked Categories : yhsm inucbr 001, how to make a small capola furnace, constructional details of cupola furnace, construction of cupola furnace, construction of the capola furnace, project on cupola furnace, project report on cupola furnace, cupola furnace in detail, cupola furnace related project, cupola furnace project, construction detail of cupola furnace, cupola furnace, cupola furnace projects, cupola furnace construction and working filetype pdf, cupola furnance, seminar topic of a cupola furnace, cupola furnace construction and working, construction and working cupola furnace ppt, construction and working of cupola furnace ppt, cupola furnace construction, coupla furnace,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  i want detail report in automatic foot dust cleaner Guest 2 413 28-04-2016 04:05 PM
Last Post: Guest
  Detail of project abstract Guest 1 573 23-08-2013 09:46 AM
Last Post: study tips
  under water construction Guest 0 657 05-08-2013 01:55 PM
Last Post: Guest
  construction challenges for bridge construction in hilly areas anil254581 4 2,549 23-01-2012 10:24 AM
Last Post: seminar addict
Star construction challenges for bridges in hilly areas khushi sharma 1 1,224 24-10-2011 10:49 AM
Last Post: seminar addict
  dam construction and road constructions rakeshmjnv 0 636 30-07-2011 04:19 PM
Last Post: rakeshmjnv
  Design and construction of temperature controlled fan maxilrose 0 1,181 22-07-2011 10:26 PM
Last Post: maxilrose
  full detail of cyber law,cyber crime courses ram1010 0 1,404 19-05-2011 09:53 PM
Last Post: ram1010
  construction waste recycling full report KMN 0 942 07-04-2011 07:56 PM
Last Post: KMN
  detail about this project documentation uday2387 0 881 16-03-2011 01:04 PM
Last Post: uday2387
This Page May Contain What is construction of cupola furnace detail And Latest Information/News About construction of cupola furnace detail,If Not ...Use Search to get more info about construction of cupola furnace detail Or Ask Here